After using our software, you will know that it is not too difficult to pass 350-401 Valid Test Cram Review exam. You will find some exam techniques about how to pass 350-401 Valid Test Cram Review exam from the exam materials and question-answer analysis provided by our Omgzlook. Besides, to make you be rest assured of our dumps, we provide 350-401 Valid Test Cram Review exam demo for you to free download. You can totally relay on us. Many candidates do not have actual combat experience, for the qualification examination is the first time to attend, they always feel aimless and worried about the 350-401 Valid Test Cram Review exam very much. Continuous update of the exam questions, and professional analysis from our professional team have become the key for most candidates to pass 350-401 Valid Test Cram Review exam.
CCNP Enterprise 350-401 Now you can have these precious materials.
After nearly ten years' efforts, now our company have become the topnotch one in the field, therefore, if you want to pass the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Cram Review exam as well as getting the related certification at a great ease, I strongly believe that the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Cram Review study materials compiled by our company is your solid choice. If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our 350-401 Valid Test Dumps Pdf exam test engine to practice. Both our soft test engine and app test engine provide the exam scene simulation functions.
It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related 350-401 Valid Test Cram Review certification is the best way to show our professional ability, however, the 350-401 Valid Test Cram Review exam is hard nut to crack but our 350-401 Valid Test Cram Review preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the 350-401 Valid Test Cram Review exam.
Cisco 350-401 Valid Test Cram Review - Our website is a very safe and regular platform.
If you have been very panic sitting in the examination room, our 350-401 Valid Test Cram Review actual exam allows you to pass the exam more calmly and calmly. After you use our products, our 350-401 Valid Test Cram Review study materials will provide you with a real test environment before the 350-401 Valid Test Cram Review exam. After the simulation, you will have a clearer understanding of the exam environment, examination process, and exam outline. And our 350-401 Valid Test Cram Review learning guide will be your best choice.
On one hand, our 350-401 Valid Test Cram Review test material owns the best quality. When it comes to the study materials selling in the market, qualities are patchy.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
We have three different versions of our EC-COUNCIL 312-38 exam questions which can cater to different needs of our customers. Oracle 1z0-071 - We treat your time as our own time, as precious as you see, so we never waste a minute or two in some useless process. And we have three different versions Of our Fortinet NSE7_NST-7.2 study guide: the PDF, the Software and the APP online. Every question from our SAP C_TS462_2023 study materials is carefully elaborated and the content of our SAP C_TS462_2023 exam questions involves the professional qualification certificate examination. Study our IBM C1000-184 training materials to write "test data" is the most suitable for your choice, after recent years show that the effect of our IBM C1000-184 guide dump has become a secret weapon of the examinee through qualification examination, a lot of the users of our IBM C1000-184 guide dump can get unexpected results in the examination.
Updated: May 28, 2022