Our services on our 350-401 Valid Test Camp Sheet exam questions are also dependable in after-sales part with employees full of favor and genial attitude towards job. So our services around the 350-401 Valid Test Camp Sheet training materials are perfect considering the needs of exam candidates all-out. They bravely undertake the duties. We believe if you compare our 350-401 Valid Test Camp Sheet training guide with the others, you will choose ours at once. Our 350-401 Valid Test Camp Sheet study materials have a professional attitude at the very beginning of its creation. As we know, our products can be recognized as the most helpful and the greatest 350-401 Valid Test Camp Sheet study engine across the globe.
CCNP Enterprise 350-401 What are you waiting for?
Welcome your purchase for our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Camp Sheet exam torrent. At the same time, as long as the user ensures that the network is stable when using our 350-401 Simulations Pdf training materials, all the operations of the learning material of can be applied perfectly. In order to save a lot of unnecessary trouble to users, we have completed our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions research and development of online learning platform, users do not need to download and install, only need your digital devices have a browser, can be done online operation of the 350-401 Simulations Pdf test guide.
We will inform you by E-mail when we have a new version. With our great efforts, our 350-401 Valid Test Camp Sheetpractice dumps have been narrowed down and targeted to the 350-401 Valid Test Camp Sheet examination. We can ensure you a pass rate as high as 99%!
Cisco 350-401 Valid Test Camp Sheet - So our customers can pass the exam with ease.
Our APP online version of 350-401 Valid Test Camp Sheet exam questions has the advantage of supporting all electronic equipment. You just need to download the online version of our 350-401 Valid Test Camp Sheet preparation dumps, and you can use our 350-401 Valid Test Camp Sheet study quiz by any electronic equipment. We can promise that the online version will not let you down. We believe that you will benefit a lot from it if you buy our 350-401 Valid Test Camp Sheet training materials.
If you like to use computer to learn, you can use the Software and the APP online versions of the 350-401 Valid Test Camp Sheet exam questions. If you like to write your own experience while studying, you can choose the PDF version of the 350-401 Valid Test Camp Sheet study materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
We believe that our UiPath UiPath-ABAv1 learning engine will meet your all needs. Snowflake ARA-C01 - In addition, when you are in the real exam environment, you can learn to control your speed and quality in answering questions and form a good habit of doing exercise, so that you’re going to be fine in the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam. If you are a college student, you can learn and use online resources through the student learning platform over the WGU Organizational-Behaviors-and-Leadership study materials. Our Palo Alto Networks PSE-Strata quiz torrent can help you get out of trouble regain confidence and embrace a better life. More importantly, we will promptly update our Microsoft AZ-400 quiz torrent based on the progress of the letter and send it to you.
Updated: May 28, 2022