But you are lucky, we can provide you with well-rounded services on 350-401 Valid Practice Questions Pdf practice braindumps to help you improve ability. You would be very pleased and thankful if you can spare your time to have a look about features of our 350-401 Valid Practice Questions Pdf study materials. With the pass rate high as 98% to 100%, you can totally rely on our 350-401 Valid Practice Questions Pdf exam questions. Since our company’s establishment, we have devoted mass manpower, materials and financial resources into 350-401 Valid Practice Questions Pdf exam materials and until now, we have a bold idea that we will definitely introduce our 350-401 Valid Practice Questions Pdf study materials to the whole world and make all people that seek fortune and better opportunities have access to realize their life value. Our 350-401 Valid Practice Questions Pdf practice questions, therefore, is bound to help you pass though the 350-401 Valid Practice Questions Pdf exam and win a better future. We deeply know that the pass rate is the most important.
CCNP Enterprise 350-401 You’ve heard it right.
Having been handling in this line for more than ten years, we can assure you that our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Practice Questions Pdf study questions are of best quality and reasonable prices for your information. Besides, the pollster conducted surveys of public opinions of our 350-401 Valid Exam Question study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our 350-401 Valid Exam Question actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career.
350-401 Valid Practice Questions Pdf study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if 350-401 Valid Practice Questions Pdf learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our 350-401 Valid Practice Questions Pdf exam questions.
Cisco 350-401 Valid Practice Questions Pdf - So customer orientation is the beliefs we honor.
Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question is compiled and verified by the first-rate experts in the industry domestically and they are linked closely with the real exam. Our products’ contents cover the entire syllabus of the exam and refer to the past years’ exam papers. Our test bank provides all the questions which may appear in the real exam and all the important information about the exam. You can use the practice test software to test whether you have mastered the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test practice dump and the function of stimulating the exam to be familiar with the real exam’s pace, atmosphere and environment. So our 350-401 Valid Practice Questions Pdf exam questions are real-exam-based and convenient for the clients to prepare for the exam.
You can have a free try for downloading our 350-401 Valid Practice Questions Pdf exam demo before you buy our products. What’s more, you can acquire the latest version of 350-401 Valid Practice Questions Pdf training materials checked and revised by our exam professionals after your purchase constantly for a year.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
SAP C_THR70_2404 - We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. You will feel grateful to choose our Nutanix NCP-CI-AWS learning quiz! We are attested that the quality of the SAP C_IEE2E_2404 test prep from our company have won great faith and favor of customers. Since our Microsoft MB-210 exam torrent is designed on the purpose to be understood by our customers all over the world, it is compiled into the simplest language to save time and efforts. ISTQB ISTQB-CTFL - We will soon solve your problems at the first time.
Updated: May 28, 2022