We believe that you will like our 350-401 Valid Exam Sample Online exam prep. Maybe most of people prefer to use the computer when they are study, but we have to admit that many people want to learn buy the paper, because they think that studying on the computer too much does harm to their eyes. 350-401 Valid Exam Sample Online test questions have the function of supporting printing in order to meet the need of customers. Without ambiguous points of questions make you confused, our 350-401 Valid Exam Sample Online practice materials can convey the essence of the content suitable for your exam. With our 350-401 Valid Exam Sample Online exam guide, you will achieve what you are expecting with ease. You can take the 350-401 Valid Exam Sample Online training materials and pass it without any difficulty.
CCNP Enterprise 350-401 They are professionals in every particular field.
Under the situation of intensifying competition in all walks of life, will you choose to remain the same and never change or choose to obtain a 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Sample Online certification which can increase your competitiveness? I think most of people will choose the latter, because most of the time certificate is a kind of threshold, with 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Exam Sample Online certification, you may have the opportunity to enter the door of an industry. Our New 350-401 Exam Dumps Demo exam questions mainly have three versions which are PDF, Software and APP online, and for their different advantafes, you can learn anywhere at any time. And the prices of our New 350-401 Exam Dumps Demo training engine are reasonable for even students to afford and according to the version that you want to buy.
A good 350-401 Valid Exam Sample Online certification must be supported by a good 350-401 Valid Exam Sample Online exam practice, which will greatly improve your learning ability and effectiveness. Our study materials have the advantage of short time, high speed and high pass rate. You only take 20 to 30 hours to practice our 350-401 Valid Exam Sample Online guide materials and then you can take the exam.
Come to study our Cisco 350-401 Valid Exam Sample Online learning materials.
If you buy the Software or the APP online version of our 350-401 Valid Exam Sample Online study materials, you will find that the timer can aid you control the time. Once it is time to submit your exercises, the system of the 350-401 Valid Exam Sample Online preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our 350-401 Valid Exam Sample Online training guide, come to choose and purchase.
Once they need to prepare an exam, our 350-401 Valid Exam Sample Online study materials are their first choice. As you know, it is troublesome to get the 350-401 Valid Exam Sample Onlinecertificate.
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
We sincerely hope that you can pay more attention to our VMware 5V0-31.23 study questions. If you buy the CIW 1D0-724 study materials from our company, you just need to spend less than 30 hours on preparing for your exam, and then you can start to take the exam. Tens of thousands of our loyal customers are benefited from our Microsoft MB-920 study materials and lead a better life now after they achieve their Microsoft MB-920 certification. Dell D-PWF-RDY-A-00 - Everything that appears in our products has been inspected by experts. You just need to pay the relevant money for the CheckPoint 156-590 practice materials.
Updated: May 28, 2022