So our service team is professional and top-tanking. We boost a professional expert team to undertake the research and the production of our 350-401 Valid Exam Collection File learning file. We employ the senior lecturers and authorized authors who have published the articles about the test to compile and organize the 350-401 Valid Exam Collection File prep guide dump. To make you understand the content more efficient, our experts add charts, diagrams and examples in to 350-401 Valid Exam Collection File exam questions to speed up you pace of gaining success. So these 350-401 Valid Exam Collection File latest dumps will be a turning point in your life. You will find that learning is becoming interesting and easy.
CCNP Enterprise 350-401 Many people think this is incredible.
CCNP Enterprise 350-401 Valid Exam Collection File - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Of course, we do it all for you to get the information you want, and you can make faster progress. The comprehensive coverage would be beneficial for you to pass the exam. Only need to spend about 20-30 hours practicing our Test 350-401 Questions And Answers study files can you be fully prepared for the exam.
It is common in modern society that many people who are more knowledgeable and capable than others finally lost some good opportunities for development because they didn’t obtain the 350-401 Valid Exam Collection File certification. The prerequisite for obtaining the 350-401 Valid Exam Collection File certification is to pass the exam, but not everyone has the ability to pass it at one time. But our 350-401 Valid Exam Collection File exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%.
So our Cisco 350-401 Valid Exam Collection File study questions are their best choice.
With the rise of internet and the advent of knowledge age, mastering knowledge about computer is of great importance. This 350-401 Valid Exam Collection File exam is your excellent chance to master more useful knowledge of it. Up to now, No one has questioned the quality of our 350-401 Valid Exam Collection File training materials, for their passing rate has reached up to 98 to 100 percent. If you make up your mind of our 350-401 Valid Exam Collection File exam questions after browsing the free demos, we will staunchly support your review and give you a comfortable and efficient purchase experience this time.
And our online test engine and the windows software of the 350-401 Valid Exam Collection File guide materials are designed more carefully. During our researching and developing, we always obey the principles of conciseness and exquisiteness.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
IBM C1000-101-KR test guide is an examination material written by many industry experts based on the examination outlines of the calendar year and industry development trends. Omgzlook can help you pass Cisco certification Salesforce Marketing-Cloud-Account-Engagement-Specialist exam and can also help you in the future about your work. Now we have PDF version, windows software and online engine of the OMG OMG-OCUP2-ADV300 certification materials. If you purchase the training materials we provide, you can pass Cisco certification Oracle 1z1-808 exam successfully. Fortinet NSE7_LED-7.0 - Sometimes, we will receive some good suggestions from our users.
Updated: May 28, 2022