If you think i'm exaggerating, you might as well take a look at our 350-401 Reliable Test Cram Review actual exam. With a high pass rate as 98% to 100%, you will be bound to pass the exam. And our 350-401 Reliable Test Cram Review training questions are popular in the market. Though our 350-401 Reliable Test Cram Review training guide is proved to have high pass rate, but If you try our 350-401 Reliable Test Cram Review exam questions but fail in the final exam, we can refund the fees in full only if you provide us with a transcript or other proof that you failed the exam. We believe that our business will last only if we treat our customers with sincerity and considerate service. All the 350-401 Reliable Test Cram Review study materials of our company can be found in the three versions.
CCNP Enterprise 350-401 You must seize the good chances when it comes.
CCNP Enterprise 350-401 Reliable Test Cram Review - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) You must ensure that you master them completely. So you must act from now. As we all know, time and tide wait for no man.
When you try our part of Cisco certification 350-401 Reliable Test Cram Review exam practice questions and answers, you can make a choice to our Omgzlook. We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Cisco certification 350-401 Reliable Test Cram Review exam is Omgzlook.
Cisco 350-401 Reliable Test Cram Review - I wish you good luck.
Omgzlook website is fully equipped with resources and the questions of Cisco 350-401 Reliable Test Cram Review exam, it also includes the Cisco 350-401 Reliable Test Cram Review exam practice test. Which can help candidates prepare for the exam and pass the exam. You can download the part of the trial exam questions and answers as a try. Omgzlook provide true and comprehensive exam questions and answers. With our exclusive online Cisco 350-401 Reliable Test Cram Review exam training materials, you'll easily through Cisco 350-401 Reliable Test Cram Review exam. Our site ensure 100% pass rate.
We all know that in the fiercely competitive IT industry, having some IT authentication certificates is very necessary. IT authentication certificate is a best proof for your IT professional knowledge and experience.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Huawei H19-308_V4.0 - Omgzlook speak with the facts, the moment when the miracle occurs can prove every word we said. Network Appliance NS0-521 - In recent decades, computer science education has been a concern of the vast majority of people around the world. Before you decide to buy, you can try a free trial version, so that you will know the quality of the Omgzlook's Cisco ISQI CT-AI_v1.0_World exam training materials. EMC D-PWF-DS-23 - The training materials can help you pass the certification. SAP C-THR81-2405 - It can guarantee you 100% pass the exam.
Updated: May 28, 2022