Sometime, most candidates have to attend an exam, they may feel nervious and don't know what to do. If you happen to be one of them, our 350-401 Reliable Practice Questions Ppt learning materials will greatly reduce your burden and improve your possibility of passing the exam. Our advantages of time-saving and efficient can make you no longer be afraid of the 350-401 Reliable Practice Questions Ppt exam, and you will find more about the benefits of our 350-401 Reliable Practice Questions Ppt exam questions later on. You only need 20-30 hours to learn our 350-401 Reliable Practice Questions Ppt test braindumps and then you can attend the exam and you have a very high possibility to pass the exam. For many people whether they are the in-service staff or the students they are busy in their job, family lives and other things. Many illegal websites will sell users' privacy to third parties, resulting in many buyers are reluctant to believe strange websites.
CCNP Enterprise 350-401 So you can take a best preparation for the exam.
CCNP Enterprise 350-401 Reliable Practice Questions Ppt - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) They still attentively accomplish their tasks. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
Our 350-401 Reliable Practice Questions Ppt study materials absolutely can add more pleasure to your life. You just need a chance to walk out. You can click to see the comments of the 350-401 Reliable Practice Questions Ppt exam braindumps and how we changed their life by helping them get the 350-401 Reliable Practice Questions Ppt certification.
Cisco 350-401 Reliable Practice Questions Ppt - So you have no reason not to choose it.
Each of us is dreaming of being the best, but only a few people take that crucial step. The key step is to work hard to make yourself better. Our 350-401 Reliable Practice Questions Ppt study materials may become your right man. Perhaps you have heard of our 350-401 Reliable Practice Questions Ppt exam braindumps. A lot of our loyal customers are very familiar with their characteristics. And our 350-401 Reliable Practice Questions Ppt learning quiz have become a very famous brand in the market and praised for the best quality.
With the Omgzlook's Cisco 350-401 Reliable Practice Questions Ppt exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
If you really want to pass the CheckPoint 156-215.81.20 exam faster, choosing a professional product is very important. Google ChromeOS-Administrator - It will help us to pass the exam successfully. As long as you use MuleSoft MCPA-Level-1 learning materials and get a MuleSoft MCPA-Level-1 certificate, you will certainly be appreciated by the leaders. Omgzlook's Cisco VMware 2V0-31.24 exam training materials are absolutely trustworthy. According to our overall evaluation and research, seldom do we have cases that customers fail the HP HPE6-A78 exam after using our study materials.
Updated: May 28, 2022