Just look at the comments on the 350-401 Reliable Exam Questions Fee training guide, you will know that how popular they are among the candidates. Our 350-401 Reliable Exam Questions Fee exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Reliable Exam Questions Fee study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. Now, quickly download 350-401 Reliable Exam Questions Fee free demo for try. You will get 100% pass with our verified 350-401 Reliable Exam Questions Fee training vce. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 Reliable Exam Questions Fee learning questions, and it is their job to officiate the routines of offering help for you.
CCNP Enterprise 350-401 So you should click our website frequently.
By concluding quintessential points into 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Questions Fee actual exam, you can pass the exam with the least time while huge progress. Convenience of the online version of our Latest 350-401 Exam Topics Pdf study materials is mainly reflected in the following aspects: on the one hand, the online version is not limited to any equipment. You are going to find the online version of our Latest 350-401 Exam Topics Pdf exam prep applies to all electronic equipment, including telephone, computer and so on.
It is all about the superior concrete and precision of our 350-401 Reliable Exam Questions Fee learning quiz that help. Every page and every points of knowledge have been written from professional experts who are proficient in this line who are being accounting for this line over ten years. Come and buy our 350-401 Reliable Exam Questions Fee study guide, you will be benefited from it.
It is better than Cisco 350-401 Reliable Exam Questions Fee dumps questions.
The industry experts hired by 350-401 Reliable Exam Questions Fee exam materials are those who have been engaged in the research of 350-401 Reliable Exam Questions Fee exam for many years. They have a keen sense of smell in the direction of the exam. Therefore, they can make accurate predictions on the exam questions. Therefore, our study materials specifically introduce a mock examination function. With 350-401 Reliable Exam Questions Fee exam materials, you can not only feel the real exam environment, but also experience the difficulty of the exam. You can test your true level through simulated exams. At the same time, after repeated practice of 350-401 Reliable Exam Questions Fee study braindumps, I believe that you will feel familiar with these questions during the exam and you will feel that taking the exam is as easy as doing exercises in peace. According to our statistics on the data so far, the passing rate of the students who have purchased one exam exceeds 99%, which is enough to see that 350-401 Reliable Exam Questions Fee test guide is a high-quality product that can help you to realize your dream.
By using these aids you will be able to modify your skills to the required limits. Your 350-401 Reliable Exam Questions Fee certification success is just a step away and is secured with 100% money back guarantee.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
IBM C1000-184 - You give us a trust and we reward you for a better future. SAP C-IEE2E-2404 - If you are always complaining that you are too spread, are overwhelmed with the job at hand, and struggle to figure out how to prioritize your efforts, these would be the basic problem of low efficiency and production. Although we cannot contact with each other face to face, but there are no disparate treatments and we treat every customer with consideration like we are around you at every stage during your review process on our Huawei H13-821_V3.0 exam questions. Microsoft SC-300 - At the same time, if you have any question, we can be sure that your question will be answered by our professional personal in a short time. Our professional experts have simplified the content of our Amazon ANS-C01-KR study guide and it is easy to be understood by all of our customers all over the world.
Updated: May 28, 2022