So, act now! Use our 350-401 New Study Questions Free quiz prep. If you do not have access to internet most of the time, if you need to go somewhere is in an offline state, but you want to learn for your 350-401 New Study Questions Free exam. In today’s society, many enterprises require their employees to have a professional 350-401 New Study Questions Free certification. It is true that related skills serve as common tools frequently used all over the world, so we can realize that how important an 350-401 New Study Questions Free certification is, also understand the importance of having a good knowledge of it. We know the certificate of 350-401 New Study Questions Free exam guide is useful and your prospective employer wants to see that you can do the job with strong prove, so our 350-401 New Study Questions Free study materials could be your opportunity.
CCNP Enterprise 350-401 Our company has also being Customer First.
CCNP Enterprise 350-401 New Study Questions Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sometimes, you must decisively abandon some trivial things, and then you can harvest happiness and fortunes. Wrong topic tend to be complex and no regularity, and the 350-401 Exam Discount Voucher torrent prep can help the users to form a good logical structure of the wrong question, this database to each user in the simulation in the practice of all kinds of wrong topic all induction and collation, and the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question then to the next step in-depth analysis of the wrong topic, allowing users in which exist in the knowledge module, tell users of our 350-401 Exam Discount Voucher exam question how to make up for their own knowledge loophole, summarizes the method to deal with such questions for, to prevent such mistakes from happening again.
Omgzlook 100% guarantee you to pass Cisco certification 350-401 New Study Questions Free exam. Our Omgzlook have a lot of IT professionals and the exam practice questions and answers we provide have been certified by many IT elites. Besides, the exam practice questions and answers have wide coverage of the content of the examination and the correct rate is up to 100%.
Cisco 350-401 New Study Questions Free - Other workers are also dedicated to their jobs.
Omgzlook is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using Omgzlook's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Omgzlook's training tool in your shopping cart now.
You can click to see the comments of the 350-401 New Study Questions Free exam braindumps and how we changed their life by helping them get the 350-401 New Study Questions Free certification. And you can also see the pass rate of our 350-401 New Study Questions Free learning guide high as 98% to 100%, we can give you a promising future.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
SAP E_ACTAI_2403 - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. No matter where you are or what you are, IBM S2000-020 practice questions promises to never use your information for commercial purposes. SAP C-TS462-2022-KR - but also allows you to pass the exam successfully. Our GARP 2016-FRR study materials may become your right man. CompTIA CS0-003 - Our training materials have through the test of practice.
Updated: May 28, 2022