Choose a good 350-401 New Study Questions Ebook exam quiz and stick with it, you will be successful! Our 350-401 New Study Questions Ebook study questions will provide you with professional guidance and quality resources, but you must also be aware of the importance of adherence. As you know, life is like the sea. It is time to start to clear exam and obtain an IT certification to improve your competitor from our Cisco 350-401 New Study Questions Ebook training PDF if you don't want to be discarded by epoch. Many IT workers have a nice improve after they get a useful certification. Our effort in building the content of our 350-401 New Study Questions Ebook learning questions lead to the development of learning guide and strengthen their perfection.
CCNP Enterprise 350-401 So you should click our website frequently.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Study Questions Ebook exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. You are going to find the online version of our Valid Dumps 350-401 Sheet exam prep applies to all electronic equipment, including telephone, computer and so on. On the other hand, if you decide to use the online version of our Valid Dumps 350-401 Sheet study materials, you don’t need to worry about no network.
Come and buy our 350-401 New Study Questions Ebook study guide, you will be benefited from it. As long as you free download the demos of our 350-401 New Study Questions Ebook exam braindumps, you will be surprised by the high quality. It is all about the superior concrete and precision of our 350-401 New Study Questions Ebook learning quiz that help.
Cisco 350-401 New Study Questions Ebook - It can help you to pass the exam successfully.
With 350-401 New Study Questions Ebook study engine, you will get rid of the dilemma that you work hard but cannot improve. With our 350-401 New Study Questions Ebook learning materials, you can spend less time but learn more knowledge than others. 350-401 New Study Questions Ebook exam questions will help you reach the peak of your career. Just think of that after you get the 350-401 New Study Questions Ebook certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! what a brighter future!
Omgzlook allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
In order to facilitate the user's offline reading, the CompTIA PT0-002 study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. To pass the Cisco Amazon SOA-C02 exam is a dream who are engaged in IT industry. And not only you will get the most rewards but also you will get an amazing study experience by our Juniper JN0-105 exam questions. It has the best training materials, which is Omgzlook;s Cisco APICS CSCP exam training materials. Google Professional-Cloud-Developer - Everyone has the right to pursue happiness and wealth.
Updated: May 28, 2022