Omgzlook senior experts have developed exercises and answers about Cisco certification 350-401 New Exam Guide Files exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use Omgzlook's products, Omgzlook can help you 100% pass your first time to attend Cisco certification 350-401 New Exam Guide Files exam. And to do that you are going to need help from a 350-401 New Exam Guide Files practice questions or braindumps. This is exactly what is delivered by our 350-401 New Exam Guide Files test materials. Rest assured that our questions and answers, you will be completely ready for the Cisco 350-401 New Exam Guide Files certification exam.
CCNP Enterprise 350-401 .
And pass the Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Exam Guide Files exam is not easy. You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Latest Exam Discount Voucher exam.
But it does not matter, because I purchased Omgzlook's Cisco 350-401 New Exam Guide Files exam training materials. With it, I can pass the Cisco 350-401 New Exam Guide Files exam easily. Road is under our feet, only you can decide its direction.
Cisco 350-401 New Exam Guide Files - We believe that you will like our products.
As we will find that, get the test 350-401 New Exam Guide Files certification, acquire the qualification of as much as possible to our employment effect is significant. But how to get the test 350-401 New Exam Guide Files certification didn't own a set of methods, and cost a lot of time to do something that has no value. With our 350-401 New Exam Guide Files exam Practice, you will feel much relax for the advantages of high-efficiency and accurate positioning on the content and formats according to the candidates’ interests and hobbies.
In the process of using the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question, if the user has some problems, the IT professor will 24 hours online to help users solve, the user can send email or contact us on the online platform. Of course, a lot of problems such as soft test engine appeared some faults or abnormal stating run phenomenon of our 350-401 New Exam Guide Files exam question, these problems cannot be addressed by simple language, we will service a secure remote assistance for users and help users immediate effectively solve the existing problems of our 350-401 New Exam Guide Files torrent prep, thus greatly enhance the user experience, beneficial to protect the user's learning resources and use digital tools, let users in a safe and healthy environment to study 350-401 New Exam Guide Files exam question.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Salesforce DEX-403 - Many people are worried about electronic viruses of online shopping. We can say that how many the Splunk SPLK-2003 certifications you get and obtain qualification certificates, to some extent determines your future employment and development, as a result, the Splunk SPLK-2003 exam guide is committed to helping you become a competitive workforce, let you have no trouble back at home. Thus we offer discounts from time to time, and you can get 50% discount at the second time you buy our Microsoft MS-900-KR question dumps after a year. We can claim that with our Microsoft SC-900 practice engine for 20 to 30 hours, you will be ready to pass the exam with confidence. Our exam questions just need students to spend 20 to 30 hours practicing on the platform which provides simulation problems, can let them have the confidence to pass the Microsoft AZ-500 exam, so little time great convenience for some workers.
Updated: May 28, 2022