App/online version of mock quiz - Being suitable to all kinds of equipment or digital devices, and you can review history and performance better. And you can choose the favorite one. Our experts generalize the knowledge of the exam into our 350-401 Latest Visual Cert Exam exam materials showing in three versions. If you are clueless about the oncoming exam, our 350-401 Latest Visual Cert Exam guide materials are trustworthy materials for your information. More than tens of thousands of exam candidate coincide to choose our 350-401 Latest Visual Cert Exampractice materials and passed their exam with satisfied scores, a lot of them even got full marks. Omgzlook has put emphasis on providing our 350-401 Latest Visual Cert Exam exam questions with high quality products with high passing rate.
CCNP Enterprise 350-401 But even the best people fail sometimes.
And our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Visual Cert Exam study braindumps deliver the value of our services. You really need our New 350-401 Test Guide practice materials which can work as the pass guarantee. Nowadays, the certification has been one of the criteria for many companies to recruit employees.
What is more, we offer customer services 24/7. Even if you fail the exams, the customer will be reimbursed for any loss or damage after buying our 350-401 Latest Visual Cert Exam guide dump. One decision will automatically lead to another decision, we believe our 350-401 Latest Visual Cert Exam guide dump will make you fall in love with our products and become regular buyers.
Cisco 350-401 Latest Visual Cert Exam - Just have a try and you will love them!
After the user has purchased our 350-401 Latest Visual Cert Exam learning materials, we will discover in the course of use that our product design is extremely scientific and reasonable. Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our 350-401 Latest Visual Cert Exam Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the 350-401 Latest Visual Cert Exam learning material. Once you have submitted your practice time, 350-401 Latest Visual Cert Exam learning Material system will automatically complete your operation.
If you believe in our products this time, you will enjoy the happiness of success all your life Our 350-401 Latest Visual Cert Exam learning quiz is the accumulation of professional knowledge worthy practicing and remembering, so you will not regret choosing our 350-401 Latest Visual Cert Exam study guide.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Microsoft DP-420 - As we all know, the world does not have two identical leaves. SAP C-TS422-2023 - You will get satisfied answers after consultation. Microsoft MB-500 - The strength of our the IT elite team will make you feel incredible. Our SAP C-TS462-2023 learning guide allows you to study anytime, anywhere. Senior IT experts in the Omgzlook constantly developed a variety of successful programs of passing Cisco certification EMC D-CI-DS-23 exam, so the results of their research can 100% guarantee you Cisco certification EMC D-CI-DS-23 exam for one time.
Updated: May 28, 2022