All in all, high efficiency of 350-401 Latest Test Simulator Fee exam material is the reason for your selection. We understand our candidates have no time to waste, everyone wants an efficient learning. So we take this factor into consideration, develop the most efficient way for you to prepare for the 350-401 Latest Test Simulator Fee exam, that is the real questions and answers practice mode, firstly, it simulates the real Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test environment perfectly, which offers greatly help to our customers. Our expert team boosts profound industry experiences and they use their precise logic to verify the test. They provide comprehensive explanation and integral details of the answers and questions. To help you get to know the exam questions and knowledge of the 350-401 Latest Test Simulator Fee practice exam successfully and smoothly, our experts just pick up the necessary and essential content in to our 350-401 Latest Test Simulator Fee test guide with unequivocal content rather than trivia knowledge that exam do not test at all.
CCNP Enterprise 350-401 Our experts have taken your worries seriously.
The content system of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Test Simulator Fee exam simulation is constructed by experts. Please check it carefully. If you need the invoice, please contact our online workers.
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of 350-401 Latest Test Simulator Fee training questions, you will agree with what I said. What our 350-401 Latest Test Simulator Fee study materials contain are all the real questions and answers that will come out in the real exam. As long as you study with our 350-401 Latest Test Simulator Fee exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure.
Cisco 350-401 Latest Test Simulator Fee - So Omgzlook a website worthy of your trust.
It is known to us that our 350-401 Latest Test Simulator Fee study materials have been keeping a high pass rate all the time. There is no doubt that it must be due to the high quality of our study materials. It is a matter of common sense that pass rate is the most important standard to testify the 350-401 Latest Test Simulator Fee study materials. The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. So if you buy the 350-401 Latest Test Simulator Fee study materials from our company, you will get the certification in a shorter time.
350-401 Latest Test Simulator Fee study materials including the official Cisco 350-401 Latest Test Simulator Fee certification training courses, Cisco 350-401 Latest Test Simulator Fee self-paced training guide, 350-401 Latest Test Simulator Fee exam Omgzlook and practice, 350-401 Latest Test Simulator Fee online exam 350-401 Latest Test Simulator Fee study guide. 350-401 Latest Test Simulator Fee simulation training package designed by Omgzlook can help you effortlessly pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
Fortinet NSE5_FMG-7.2 - Be supportive to offline exercise on the condition that you practice it without mobile data. SAP C-IEE2E-2404 - With it, you will be brimming with confidence, fully to do the exam preparation. We have three packages of the Juniper JN0-214 study materials: the PDF, Software and APP online and each one of them has its respect and different advantages. Tableau TDA-C01 - With a good career, and of course you can create a steady stream of corporate and national interests, so as to promote the development of the national economy. Buying all our information can guarantee you to pass your first Cisco certification Splunk SPLK-3003 exam.
Updated: May 28, 2022