If you choose Omgzlook, success is not far away for you. And soon you can get Cisco certification 350-401 Latest Test Collection Free exam certificate. The product of Omgzlook not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service. So do not hesitate and buy our 350-401 Latest Test Collection Free preparation exam, you will benefit a lot from our products. The software version is one of the three versions of our 350-401 Latest Test Collection Free actual exam, which is designed by the experts from our company. Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak.
CCNP Enterprise 350-401 We guarantee you 100% certified.
CCNP Enterprise 350-401 Latest Test Collection Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) The last but not least we have professional groups providing guidance in terms of download and installment remotely. Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the Cisco 350-401 Latest Test Practice exam.
Most of the experts have been studying in the professional field for many years and have accumulated much experience in our 350-401 Latest Test Collection Free practice questions. The high-quality of our 350-401 Latest Test Collection Free exam questions are praised by tens of thousands of our customers. You may try it!
Cisco 350-401 Latest Test Collection Free - They can be obtained within five minutes.
If you fail, don't forget to learn your lesson. If you still prepare for your test yourself and fail again and again, it is time for you to choose a valid 350-401 Latest Test Collection Free study guide; this will be your best method for clearing exam and obtain a certification. Good 350-401 Latest Test Collection Free study guide will be a shortcut for you to well-directed prepare and practice efficiently, you will avoid do much useless efforts and do something interesting. Omgzlook releases 100% pass-rate 350-401 Latest Test Collection Free study guide files which guarantee candidates 100% pass exam in the first attempt.
If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format of our 350-401 Latest Test Collection Free study guide. And besides, you can take it with you wherever you go for it is portable and takes no place.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
We constantly check the updating of Microsoft AZ-104 vce pdf to follow the current exam requirement and you will be allowed to free update your pdf files one-year. We often ask, what is the purpose of learning? Why should we study? Why did you study for Juniper JN0-280exam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning Juniper JN0-280 exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test Juniper JN0-280 certification, get a certificate, to prove better us, to pave the way for our future life. Our website aimed to helping you and fully supporting you to pass Huawei H12-711_V4.0 actual test with high passing score in your first try. If you are willing to try our Fortinet FCSS_SASE_AD-23 study materials, we believe you will not regret your choice. Now, let’s prepare for the exam test with the SAP C-TS422-2023 training pdf offered by Omgzlook.
Updated: May 28, 2022