Please give us a chance to service you; you will be satisfied with our training prep. Our 350-401 Latest Test Collection File preparation exam will be very useful for you if you are going to take the exam. So if you buy our 350-401 Latest Test Collection File guide quiz, it will help you pass your exam and get the certification in a short time, and you will find that our 350-401 Latest Test Collection File study materials are good value for money. In addition, when you are in the real exam environment, you can learn to control your speed and quality in answering questions and form a good habit of doing exercise, so that you’re going to be fine in the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam. Nowadays, seldom do the exam banks have such an integrated system to provide you a simulation test. If you are a college student, you can learn and use online resources through the student learning platform over the 350-401 Latest Test Collection File study materials.
CCNP Enterprise 350-401 Finding a good paying job is available for you.
CCNP Enterprise 350-401 Latest Test Collection File - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Remember this version support Windows system users only. They will thank you so much. Our company never sets many restrictions to the 350-401 Latest Exam Collection Materials exam question.
Get the test 350-401 Latest Test Collection File certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so 350-401 Latest Test Collection File exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Users do not need to spend too much time on 350-401 Latest Test Collection File questions torrent, only need to use their time pieces for efficient learning, the cost is about 20 to 30 hours, users can easily master the test key and difficulties of questions and answers of 350-401 Latest Test Collection File prep guide, and in such a short time acquisition of accurate examination skills, better answer out of step, so as to realize high pass the qualification test, has obtained the corresponding qualification certificate.
Cisco 350-401 Latest Test Collection File - Also, the system will deduct the relevant money.
We all know that 350-401 Latest Test Collection File learning guide can help us solve learning problems. But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely. Unlike those complex and esoteric materials, our 350-401 Latest Test Collection File preparation prep is not only of high quality, but also easy to learn. For our professional experts simplified the content of the350-401 Latest Test Collection File exam questions for all our customers to be understood.
In order to remain competitive in the market, our company has been keeping researching and developing of the new 350-401 Latest Test Collection File exam questions. We are focused on offering the most comprehensive 350-401 Latest Test Collection File study materials which cover all official tests.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
But now, your search is ended as you have got to the right place where you can catch the finest Microsoft PL-500-CN exam materials. Our CompTIA 220-1101 study materials can help you get your certification in the least time with the least efforts. PECB Lead-Cybersecurity-Manager - Users can evaluate our products by downloading free demo templates prior to formal purchase. Huawei H12-621_V1.0 - So you do not need to worry about that you cannot understand them. ISM LEAD - Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate.
Updated: May 28, 2022