350-401 Latest Practice Questions Book & 350-401 Valid Exam Cram Review - Cisco Reliable 350-401 Exam Cram - Omgzlook

We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of Omgzlook to help you pass your first time Cisco certification 350-401 Latest Practice Questions Book exam is very cost-effective. Omgzlook provide a good after-sales service for all customers. Once you receive our email, just begin to your new learning journey. Normally, you just need to wait for about five to ten minutes after you purchase our 350-401 Latest Practice Questions Book learning braindumps. Omgzlook Cisco 350-401 Latest Practice Questions Book exam information is proven.

CCNP Enterprise 350-401 The rate of return will be very obvious for you.

CCNP Enterprise 350-401 Latest Practice Questions Book - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With this certification, you will get international recognition and acceptance. Next, through my introduction, I hope you can have a deeper understanding of our Reliable 350-401 Exam Preparation learning quiz. We really hope that our Reliable 350-401 Exam Preparation practice engine will give you some help.

The curtain of life stage may be opened at any time, the key is that you are willing to show, or choose to avoid. Most of People who can seize the opportunityin front of them are successful. So you have to seize this opportunity of Omgzlook.

Cisco 350-401 Latest Practice Questions Book - You can really try it we will never let you down!

As a IT worker sometime you may know you will take advantage of new technology more quickly by farming out computer operations, we prefer to strengthen own strong points. Our 350-401 Latest Practice Questions Book test braindump materials is popular based on that too. As we all know the passing rate for IT exams is low, the wise choice for candidates will select valid 350-401 Latest Practice Questions Book test braindump materials to make you pass exam surely and fast. Professional handles professional affairs.

Our highly efficient operating system for learning materials has won the praise of many customers. If you are determined to purchase our 350-401 Latest Practice Questions Book study tool, we can assure you that you can receive an email from our efficient system within 5 to 10 minutes after your payment, which means that you do not need to wait a long time to experience our learning materials.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

The intelligence of the ISM CORe test engine has inspired the enthusiastic for the study. CompTIA PT0-002 - Only firm people will reach the other side. No need to doubt and worry, thousands of candidates choose our exam training materials, you shouldn't miss this high pass-rate Microsoft MS-721 training PDF materials. Our experts made significant contribution to their excellence of the Cisco CCST-Networking study materials. We assist you to prepare the key knowledge points of Linux Foundation HFCP actual test and obtain the up-to-dated exam answers.

Updated: May 28, 2022