The efficiency of our 350-401 Latest Exam Sample Online exam braindumps has far beyond your expectation. On one hand, our 350-401 Latest Exam Sample Online study materials are all the latest and valid exam questions and answers that will bring you the pass guarantee. on the other side, we offer this after-sales service to all our customers to ensure that they have plenty of opportunities to successfully pass their actual exam and finally get their desired certification of 350-401 Latest Exam Sample Online learning materials. Once you decide to buy, you will have many benefits like free update lasting one-year and convenient payment mode. We will inform you immediately once there are latest versions of 350-401 Latest Exam Sample Online test question released. For customers who are bearing pressure of work or suffering from career crisis, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool of inferior quality will be detrimental to their life, render stagnancy or even cause loss of salary.
350-401 Latest Exam Sample Online test question will change your perception.
350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Exam Sample Online exam prep look forward to meeting you. New trial might change your life greatly. Our company attaches great importance on improving the 350-401 Examinations Actual Questions study prep.
We need to have more strength to get what we want, and 350-401 Latest Exam Sample Online exam dumps may give you these things. After you use our study materials, you can get 350-401 Latest Exam Sample Online certification, which will better show your ability, among many competitors, you will be very prominent. Using 350-401 Latest Exam Sample Online exam prep is an important step for you to improve your soft power.
Cisco 350-401 Latest Exam Sample Online - But you must have a browser on your device.
If we update, we will provide you professional latest version of 350-401 Latest Exam Sample Online dumps torrent as soon as possible, which means that you keep up with your latest knowledge in time. Therefore, we believe that you will never regret to use the 350-401 Latest Exam Sample Online exam dumps. Let’s learn 350-401 Latest Exam Sample Online exam dumps, and you can pass the exam at once. When you pass the 350-401 Latest Exam Sample Online exam and get a certificate, you will find that you are a step closer to your dream. It will be a first step to achieve your dreams.
There may be a lot of people feel that the preparation process for 350-401 Latest Exam Sample Online exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our 350-401 Latest Exam Sample Online exam materials will radically change this.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our Cisco 300-425 real exam try to ensure that every customer is satisfied, which can be embodied in the convenient and quick refund process. IAPP CIPT - Our target is to reduce your pressure and improve your learning efficiency from preparing exam. If you buy our Amazon SAA-C03-KR exam questions, then you will find that Our Amazon SAA-C03-KR actual exam has covered all the knowledge that must be mastered in the exam. And our IBM C1000-101-KR training questions are popular in the market. So, please give the ISACA IT-Risk-Fundamentals study materials a chance to help you.
Updated: May 28, 2022