If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our 350-401 Latest Associate Level Exam exam test engine to practice. Both our soft test engine and app test engine provide the exam scene simulation functions. You set timed 350-401 Latest Associate Level Exam test and practice again and again. It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related 350-401 Latest Associate Level Exam certification is the best way to show our professional ability, however, the 350-401 Latest Associate Level Exam exam is hard nut to crack but our 350-401 Latest Associate Level Exam preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the 350-401 Latest Associate Level Exam exam. Improve your professional ability with our 350-401 Latest Associate Level Exam certification.
All 350-401 Latest Associate Level Exam actual exams are 100 percent assured.
Differ as a result the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Associate Level Exam questions torrent geared to the needs of the user level, cultural level is uneven, have a plenty of college students in school, have a plenty of work for workers, and even some low education level of people laid off, so in order to adapt to different level differences in users, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Associate Level Exam exam questions at the time of writing teaching materials with a special focus on the text information expression, as little as possible the use of crude esoteric jargon, as much as possible by everyone can understand popular words to express some seem esoteric knowledge, so that more users through the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Associate Level Exam prep guide to know that the main content of qualification examination, stimulate the learning enthusiasm of the user, arouse their interest in learning. Our veteran professional generalize the most important points of questions easily tested in the 350-401 Valid Free Study Questions practice exam into our practice questions. Their professional work-skill paid off after our 350-401 Valid Free Study Questions training materials being acceptable by tens of thousands of exam candidates among the market.
How you can gain the 350-401 Latest Associate Level Exam certification with ease in the least time? The answer is our 350-401 Latest Associate Level Exam study materials for we have engaged in this field for over ten years and we have become the professional standard over all the exam materials. You can free download the demos which are part of our 350-401 Latest Associate Level Exam exam braindumps, you will find that how good they are for our professionals devote of themselves on compiling and updating the most accurate content of our 350-401 Latest Associate Level Exam exam questions.
Because it can help you prepare for the Cisco 350-401 Latest Associate Level Exam exam.
Which kind of 350-401 Latest Associate Level Exam certificate is most authorized, efficient and useful? We recommend you the 350-401 Latest Associate Level Exam certificate because it can prove that you are competent in some area and boost outstanding abilities. If you buy our 350-401 Latest Associate Level Exam study materials you will pass the test smoothly and easily. We boost professional expert team to organize and compile the 350-401 Latest Associate Level Exam training guide diligently and provide the great service.
However, we need to realize that the genius only means hard-working all one’s life. It means that if you do not persist in preparing for the 350-401 Latest Associate Level Exam exam, you are doomed to failure.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
More importantly, if you take our products into consideration, our Snowflake ARA-C01 study materials will bring a good academic outcome for you. Salesforce PDX-101 - After all, no one can steal your knowledge. Our HP HPE6-A78 exam dumps will lead you to success! Do not worry, in order to help you solve your problem and let you have a good understanding of our EMC D-CI-DS-23 study practice dump, the experts and professors from our company have designed the trial version for all people. With the help of our WGU Cybersecurity-Architecture-and-Engineering training guide, your dream won’t be delayed anymore.
Updated: May 28, 2022