The 200-301 Reliable Exam Cram Materials latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 200-301 Reliable Exam Cram Materials exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 200-301 Reliable Exam Cram Materials learning guide. With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. Our 200-301 Reliable Exam Cram Materials learning materials provide you with a platform of knowledge to help you achieve your wishes. Do you want to find a job that really fulfills your ambitions? That's because you haven't found an opportunity to improve your ability to lay a solid foundation for a good career. According to the survey of our company, we have known that a lot of people hope to try the 200-301 Reliable Exam Cram Materials test training materials from our company before they buy the study materials, because if they do not have a try about our study materials, they cannot sure whether the study materials from our company is suitable for them to prepare for the exam or not.
CCNA 200-301 And we have become a popular brand in this field.
As long as you try our 200-301 - Cisco Certified Network Associate Exam Reliable Exam Cram Materials exam questions, we believe you will fall in love with it. For many people, it’s no panic passing the Reliable 200-301 Test Objectives exam in a short time. Luckily enough，as a professional company in the field of Reliable 200-301 Test Objectives practice questions ,our products will revolutionize the issue.
We guarantee that you can pass the exam at one time even within one week based on practicing our 200-301 Reliable Exam Cram Materials exam materials regularly. 98 to 100 percent of former exam candidates have achieved their success by the help of our 200-301 Reliable Exam Cram Materials practice questions. And we have been treated as the best friend as our 200-301 Reliable Exam Cram Materials training guide can really help and change the condition which our loyal customers are in and give them a better future.
Cisco 200-301 Reliable Exam Cram Materials - Join us and you will be one of them.
As we all know, it is difficult to prepare the 200-301 Reliable Exam Cram Materials exam by ourselves. Excellent guidance is indispensable. If you urgently need help, come to buy our study materials. Our company has been regarded as the most excellent online retailers of the 200-301 Reliable Exam Cram Materials exam question. So our assistance is the most professional and superior. You can totally rely on our study materials to pass the exam. All the key and difficult points of the 200-301 Reliable Exam Cram Materials exam have been summarized by our experts. They have rearranged all contents, which is convenient for your practice. Perhaps you cannot grasp all crucial parts of the 200-301 Reliable Exam Cram Materials study tool by yourself. You also can refer to other candidates’ review guidance, which might give you some help. Then we can offer you a variety of learning styles. Our printable 200-301 Reliable Exam Cram Materials real exam dumps, online engine and windows software are popular among candidates. So you will never feel bored when studying on our 200-301 Reliable Exam Cram Materials study tool.
To be convenient for the learners, our 200-301 Reliable Exam Cram Materials certification questions provide the test practice software to help the learners check their learning results at any time. Our 200-301 Reliable Exam Cram Materials study practice guide takes full account of the needs of the real exam and conveniences for the clients.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Linux Foundation FOCP - If you fail to pass the exam, we will give a full refund. If you have any worry about the ISTQB CT-AI exam, do not worry, we are glad to help you. Blue Prism AD01 - A large number of buyers pouring into our website every day can prove this. Although we come across some technical questions of our Microsoft AZ-104 learning guide during development process, we still never give up to developing our Microsoft AZ-104 practice engine to be the best in every detail. Up to now, our SAP C_BW4H_2404 training quiz has helped countless candidates to obtain desired certificate.
Updated: May 28, 2022