Dear customers, you may think it is out of your league before such as winning the JN0-643 Valid Exam Practice exam practice is possible within a week or a JN0-643 Valid Exam Practice practice material could have passing rate over 98 percent. This time it will not be illusions for you anymore. You can learn some authentic knowledge with our high accuracy and efficiency JN0-643 Valid Exam Practice simulating questions and help you get authentic knowledge of the exam. At the same time, if you have problems with downloading and installing, Enterprise Routing and Switching, Professional (JNCIP-ENT) torrent prep also has dedicated staff that can provide you with remote online guidance. In order to allow you to use our products with confidence, JN0-643 Valid Exam Practice test guide provide you with a 100% pass rate guarantee. It all starts from our JN0-643 Valid Exam Practice learning questions.
JNCIP JN0-643 They are quite convenient.
JNCIP JN0-643 Valid Exam Practice - Enterprise Routing and Switching, Professional (JNCIP-ENT) With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. Our JN0-643 Interactive EBook exam question can help you learn effectively and ultimately obtain the authority certification of Juniper, which will fully prove your ability and let you stand out in the labor market. We have the confidence and ability to make you finally have rich rewards.
We can promise that our company will provide the demo of the JN0-643 Valid Exam Practice learn prep for all people to help them make the better choice. It means you can try our demo and you do not need to spend any money. According to the survey of our company, we have known that a lot of people hope to try the JN0-643 Valid Exam Practice test training materials from our company before they buy the study materials, because if they do not have a try about our study materials, they cannot sure whether the study materials from our company is suitable for them to prepare for the exam or not.
Juniper JN0-643 Valid Exam Practice - Our company is professional brand.
Our company always feedbacks our candidates with highly-qualified JN0-643 Valid Exam Practice study guide and technical excellence and continuously developing the most professional JN0-643 Valid Exam Practice exam materials. You can see the high pass rate as 98% to 100%, which is unmarched in the market. What is more, our JN0-643 Valid Exam Practice practice engine persists in creating a modern service oriented system and strive for providing more preferential activities for your convenience.
More importantly, the demo from our company is free for all people. You will have a deep understanding of the JN0-643 Valid Exam Practice study braindumps from our company by the free demo.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B
QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 4
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 5
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
With over a decade’s endeavor, our Qlik QSDA2024 practice guide successfully become the most reliable products in the industry. Believe it or not that up to you, our Juniper JN0-280 training materials are powerful and useful, it can solve all your stress and difficulties in reviewing the Juniper JN0-280 exams. However, our Citrix 1Y0-341 exam questions can stand by your side. Salesforce Salesforce-Marketing-Associate - The more customers we buy, the bigger the discount will be. Before purchasing, you may be confused about what kind of ISC CCSP-KR guide questions you need.
Updated: May 28, 2022