Firstly, you will learn many useful knowledge and skills from our JN0-643 Practice Questions Sheet exam guide, which is a valuable asset in your life. After all, no one can steal your knowledge. In addition, you can get the valuable JN0-643 Practice Questions Sheet certificate. Choosing our JN0-643 Practice Questions Sheet study material, you will find that it will be very easy for you to overcome your shortcomings and become a persistent person. Our JN0-643 Practice Questions Sheet exam dumps will lead you to success! We believe that the trial version provided by our company will help you know about our study materials well and make the good choice for yourself.
JNCIP JN0-643 The reality is often cruel.
We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Practice Questions Sheet test guide have reached as high as 99%, which definitely ranks the top among our peers. Imagine, if you're using a JN0-643 New Study Questions Files practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the JN0-643 New Study Questions Files test material can avoid these risks very well.
All in all, high efficiency of JN0-643 Practice Questions Sheet exam material is the reason for your selection. We understand our candidates have no time to waste, everyone wants an efficient learning. So we take this factor into consideration, develop the most efficient way for you to prepare for the JN0-643 Practice Questions Sheet exam, that is the real questions and answers practice mode, firstly, it simulates the real Enterprise Routing and Switching, Professional (JNCIP-ENT) test environment perfectly, which offers greatly help to our customers.
Juniper JN0-643 Practice Questions Sheet - Our experts have taken your worries seriously.
The content system of JN0-643 Practice Questions Sheet exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our JN0-643 Practice Questions Sheet study materials, you can also get them at any time. After you choose JN0-643 Practice Questions Sheet preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results.
You can download the electronic invoice of the JN0-643 Practice Questions Sheet study materials and reserve it. Once you have decided to purchase our JN0-643 Practice Questions Sheet study materials, you can add it to your cart.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 2
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
QUESTION NO: 3
Which two statements are correct about MSTP? (Choose two.)
A. It allows you to preprovision VLAN IDs to spanning tree instances.
B. It provides a more scalable solution than VSTP.
C. It is not supported when using MVRP.
D. It allows you to use VLAN groups to simplify configuration tasks when groups of VLANs use the same parameters.
Answer: A,B
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 5
-- Exhibit --
user@router> show configuration routing-options
rib-groups {
foo {
import-rib [ inet.8 inet.2 inet.0 ];
}
}
user@router> show configuration protocols pim
rib-group inet foo;
interface all;
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, which routing table is used for IPv4 multicast RPF checks?
A. inet.0
B. inet.2
C. foo.inet.0
D. inet.8
Answer: D
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of SAP C-THR84-2405 training questions, you will agree with what I said. EMC D-CSF-SC-01 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. How much time do you think it takes to pass an exam? Our HP HPE7-A08 learning materials can assure you that you only need to spend twenty to thirty hours to pass the exam. We can be sure that with the professional help of our Adobe AD0-E906 test guide you will surely get a very good experience. So our IIA IIA-CIA-Part3-3P-KR exam questions would be an advisable choice for you.
Updated: May 28, 2022