You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? Omgzlook's Juniper JN0-643 Exam Guide Materials exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together. We are constantly improving and just want to give you the best JN0-643 Exam Guide Materials learning braindumps. And we have engaged for years to become a trustable study flatform for helping you pass the JN0-643 Exam Guide Materials exam. To pass the Juniper JN0-643 Exam Guide Materials exam, in fact, is not so difficult, the key is what method you use.
JNCIP JN0-643 The talent is everywhere in modern society.
Actually, some practice materials are shooting the breeze about their effectiveness, but our JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Exam Guide Materials training quiz are real high quality practice materials with passing rate up to 98 to 100 percent. Opportunities always for those who are well prepared and we wish you not to miss the good opportunities. Omgzlook provide you with the most authoritative and the fullest Juniper New JN0-643 Test Guide Files exam dumps, thus the hit rate is very high.
The most important part is that all contents were being sifted with diligent attention. No errors or mistakes will be found within our JN0-643 Exam Guide Materials study guide. If you are curious or doubtful about the proficiency of our JN0-643 Exam Guide Materials preparation quiz, we can explain the painstakingly word we did behind the light.
Now, Juniper JN0-643 Exam Guide Materials exam guide gives you this opportunity.
The time and energy are all very important for the office workers. In order to get the JN0-643 Exam Guide Materials certification with the less time and energy investment, you need a useful and valid Juniper study material for your preparation. JN0-643 Exam Guide Materials free download pdf will be the right material you find. The comprehensive contents of JN0-643 Exam Guide Materials practice torrent can satisfied your needs and help you solve the problem in the actual test easily. Now, choose our JN0-643 Exam Guide Materials study practice, you will get high scores.
About some esoteric points, they illustrate with examples for you on the JN0-643 Exam Guide Materials exam braindumps. With the cumulative effort over the past years, our JN0-643 Exam Guide Materials study guide has made great progress with passing rate up to 98 to 100 percent among the market.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 2
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 4
Which two statements are correct about MSTP? (Choose two.)
A. It allows you to preprovision VLAN IDs to spanning tree instances.
B. It provides a more scalable solution than VSTP.
C. It is not supported when using MVRP.
D. It allows you to use VLAN groups to simplify configuration tasks when groups of VLANs use the same parameters.
Answer: A,B
QUESTION NO: 5
-- Exhibit --
user@router> show configuration routing-options
rib-groups {
foo {
import-rib [ inet.8 inet.2 inet.0 ];
}
}
user@router> show configuration protocols pim
rib-group inet foo;
interface all;
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, which routing table is used for IPv4 multicast RPF checks?
A. inet.0
B. inet.2
C. foo.inet.0
D. inet.8
Answer: D
In addition, you will instantly download the ISO ISOIEC20000LI pdf vce after you complete the payment. Our Adobe AD0-E716 study materials will be your best learning partner and will accompany you through every day of the review. CIPS L4M2 - The secret of success is constancy to purpose. ISC CCSP-KR - With the rapid development of the economy, the demands of society on us are getting higher and higher. The content of our Oracle 1Z0-819 pass guide covers the most of questions in the actual test and all you need to do is review our Oracle 1Z0-819 vce dumps carefully before taking the exam.
Updated: May 28, 2022