Each version has the suitable place and device for customers to learn anytime, anywhere. In order to give you a basic understanding of our various versions on our H31-161 Reliable Study Questions exam questions, each version offers a free trial. So there are three free demos of our H31-161 Reliable Study Questions exam materials. Now passing rate of them has reached up to 98 to 100 percent. By keeping minimizing weak points and maiming strong points, our H31-161 Reliable Study Questions exam materials are nearly perfect for you to choose. Therefore, this is the point of our H31-161 Reliable Study Questions exam materials, designed to allow you to spend less time and money to easily pass the exam.
HCIE-Carrier IP H31-161 So you can take a best preparation for the exam.
HCIE-Carrier IP H31-161 Reliable Study Questions - HCIE-Carrier IP (Written) Please have a try and give us an opportunity. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
Our H31-161 Reliable Study Questions study materials absolutely can add more pleasure to your life. You just need a chance to walk out. You can click to see the comments of the H31-161 Reliable Study Questions exam braindumps and how we changed their life by helping them get the H31-161 Reliable Study Questions certification.
Huawei H31-161 Reliable Study Questions - It will help us to pass the exam successfully.
What is your reason for wanting to be certified with H31-161 Reliable Study Questions? I believe you must want to get more opportunities. As long as you use H31-161 Reliable Study Questions learning materials and get a H31-161 Reliable Study Questions certificate, you will certainly be appreciated by the leaders. As you can imagine that you can get a promotion sooner or latter, not only on the salary but also on the position, so what are you waiting for? Just come and buy our H31-161 Reliable Study Questions study braindumps.
If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
The system of Fortinet FCSS_NST_SE-7.4 test guide will keep track of your learning progress in the whole course. Juniper JN0-452 - Then, you need to upgrade and develop yourself. As long as you study with our OMSB OMSB_OEN exam questions for 20 to 30 hours, you will pass the exam for sure. SAP C_THR83_2405 - Whatever exam you choose to take, Omgzlook training dumps will be very helpful to you. Moreover our Salesforce B2C-Commerce-Developer test guides provide customers with supplement service-mock test, which can totally inspire them to study hard and check for defects during their learning process.
Updated: May 27, 2022