You will get a better job or get a big rise on the position as well as the salary. And we can claim that if you study with our H31-161 Questions And Answers study materials for 20 to 30 hours, you will pass the exam with ease. Perhaps you do not understand. Why the clients speak highly of our H31-161 Questions And Answers exam dump? Our dedicated service, high quality and passing rate and diversified functions contribute greatly to the high prestige of our products. We provide free trial service before the purchase, the consultation service online after the sale, free update service and the refund service in case the clients fail in the test. H31-161 Questions And Answers practice prep broke the limitations of devices and networks.
HCIE-Carrier IP H31-161 In modern society, we are busy every day.
Our H31-161 - HCIE-Carrier IP (Written) Questions And Answers exam question can make you stand out in the competition. What is more, there are extra place for you to make notes below every question of the H31-161 Examcollection Questions Answers practice quiz. Don't you think it is quite amazing? Just come and have a try!
First, we have high pass rate as 98% to 100% which is unique in the market. Secondly, the price of the H31-161 Questions And Answers study materials is favourable. Our content and design of the H31-161 Questions And Answers exam questions have laid a good reputation for us.
Huawei H31-161 Questions And Answers - We will never neglect any user.
Our company is open-handed to offer benefits at intervals, with H31-161 Questions And Answers learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our H31-161 Questions And Answers practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the H31-161 Questions And Answers exam.
If you decide to buy a H31-161 Questions And Answers exam braindumps, you definitely want to use it right away! H31-161 Questions And Answers training guide’s powerful network and 24-hour online staff can meet your needs.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
SAP C-ABAPD-2309 - They are unsuspecting experts who you can count on. With the difficulties and inconveniences existing for many groups of people like white-collar worker, getting a Juniper JN0-452 certification may be draining. So CompTIA N10-008 exam dumps are definitely valuable acquisitions. Lpi 102-500 - Then I tell you this is enough! We make Palo Alto Networks PSE-SoftwareFirewall exam prep from exam candidate perspective, and offer high quality practice materials with reasonable prices but various benefits.
Updated: May 27, 2022