Our experts all have a good command of exam skills to cope with the H31-161 Latest Test Answers preparation materials efficiently in case you have limited time to prepare for it, because all questions within them are professionally co-related with the H31-161 Latest Test Answers exam. Moreover, to write the Up-to-date H31-161 Latest Test Answers practice braindumps, they never stop the pace of being better. As long as you buy our H31-161 Latest Test Answers study quiz, you will find that we update it from time to time according to the exam center. Our H31-161 Latest Test Answers exam questions can assure you that you will pass the H31-161 Latest Test Answers exam as well as getting the related certification under the guidance of our H31-161 Latest Test Answers study materials as easy as pie. Firstly, the pass rate among our customers has reached as high as 98% to 100%, which marks the highest pass rate in the field. They develop the H31-161 Latest Test Answers exam guide targeted to real exam.
HCIE-Carrier IP H31-161 It is an undeniable fact.
And this version also helps establish the confidence of the candidates when they attend the H31-161 - HCIE-Carrier IP (Written) Latest Test Answers exam after practicing. If you want to attend the exam, Omgzlook Huawei Pdf Demo H31-161 Download questions and answers can offer you convenience. The dumps are indispensable and the best.
Our H31-161 Latest Test Answers learning guide provides a variety of functions to help the clients improve their learning. For example, the function to stimulate the exam helps the clients test their learning results of the H31-161 Latest Test Answers learning dump in an environment which is highly similar to the real exam. Our H31-161 Latest Test Answers exam guide question is recognized as the standard and authorized study materials and is widely commended at home and abroad.
Huawei H31-161 Latest Test Answers - As long as the road is right, success is near.
Our HCIE-Carrier IP (Written) exam questions are designed by a reliable and reputable company and our company has rich experience in doing research about the study materials. We can make sure that all employees in our company have wide experience and advanced technologies in designing the H31-161 Latest Test Answers study dump. So a growing number of the people have used our study materials in the past years, and it has been a generally acknowledged fact that the quality of the H31-161 Latest Test Answers test guide from our company is best in the study materials market. Now we would like to share the advantages of our H31-161 Latest Test Answers study dump to you, we hope you can spend several minutes on reading our introduction; you will benefit a lot from it.
Using H31-161 Latest Test Answers real questions will not only help you clear exam with less time and money but also bring you a bright future. We are looking forward to your join.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
If you use a trial version of SAP C_S4EWM_2023 training prep, you can find that our study materials have such a high passing rate and so many users support it. Valid Huawei H19-301_V3.0 test questions can be access and instantly downloaded after purchased and there are free Huawei H19-301_V3.0 pdf demo for you to check. IIA IIA-CHAL-QISA - In the process of development, it also constantly considers the different needs of users. The frequently updated of SAP C-LIXEA-2404 latest torrent can ensure you get the newest and latest study material. Compared with your colleagues around you, with the help of our Cisco 200-301-KR preparation questions, you will also be able to have more efficient work performance.
Updated: May 27, 2022