If you also have a IT dream, quickly put it into reality. Select Omgzlook's Huawei H31-161 Latest Exam Guide exam training materials, and it is absolutely trustworthy. Everyone has their own dreams. You may try it! Our H31-161 Latest Exam Guide preparation exam have assembled a team of professional experts incorporating domestic and overseas experts and scholars to research and design related exam bank, committing great efforts to work for our candidates. In fact, as long as you take the right approach, everything is possible.
HCIE-Carrier IP H31-161 Also, we have benefited from such good behavior.
HCIE-Carrier IP H31-161 Latest Exam Guide - HCIE-Carrier IP (Written) This ensures that you will cover more topics thus increasing your chances of success. It is a generally accepted fact that the Latest Real H31-161 Exam exam has attracted more and more attention and become widely acceptable in the past years. Are you worried about you poor life now and again? Are you desired to gain a decent job in the near future? Do you dream of a better life? Do you want to own better treatment in the field? If your answer is yes, please prepare for the Latest Real H31-161 Exam exam.
All the necessary points have been mentioned in our H31-161 Latest Exam Guide practice engine particularly. About some tough questions or important points, they left notes under them. Besides, our experts will concern about changes happened in H31-161 Latest Exam Guide study prep all the time.
Huawei H31-161 Latest Exam Guide - The dynamic society prods us to make better.
Our H31-161 Latest Exam Guide study materials have a professional attitude at the very beginning of its creation. The series of H31-161 Latest Exam Guide measures we have taken is also to allow you to have the most professional products and the most professional services. I believe that in addition to our H31-161 Latest Exam Guide exam questions, you have also used a variety of products. We believe if you compare our H31-161 Latest Exam Guide training guide with the others, you will choose ours at once.
As we know, our products can be recognized as the most helpful and the greatest H31-161 Latest Exam Guide study engine across the globe. Even though you are happy to hear this good news, you may think our price is higher than others.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
Users can learn the latest and latest test information through our SAP C-BW4H-214 test dumps. Welcome your purchase for our Oracle 1z1-808 exam torrent. At the same time, as long as the user ensures that the network is stable when using our ISQI CT-AI_v1.0_World training materials, all the operations of the learning material of can be applied perfectly. The content of our Huawei H19-301_V3.0 study materials has always been kept up to date. ASQ CQE-KR - You will also get more salary, and then you can provide a better life for yourself and your family.
Updated: May 27, 2022