H31-161 Exam Study Guide - Huawei Study Guide H31-161 Pdf - HCIE Carrier IP (Written) - Omgzlook

H31-161 Exam Study Guide study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if H31-161 Exam Study Guide learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our H31-161 Exam Study Guide exam questions. The latest H31-161 Exam Study Guide quiz torrent can directly lead you to the success of your career. Our materials can simulate real operation exam atmosphere and simulate exams. If you have any questions after you buy our H31-161 Exam Study Guide study guide, you can always get thoughtful support and help by email or online inquiry.

HCIE-Carrier IP H31-161 So customer orientation is the beliefs we honor.

HCIE-Carrier IP H31-161 Exam Study Guide - HCIE-Carrier IP (Written) You can use the practice test software to test whether you have mastered the HCIE-Carrier IP (Written) test practice dump and the function of stimulating the exam to be familiar with the real exam’s pace, atmosphere and environment. Besides, the pass rate of our H31-161 Valid Test Cram Review exam questions are unparalled high as 98% to 100%, you will get success easily with our help. There are so many features to show that our H31-161 Valid Test Cram Review study guide surpasses others.

More and more people look forward to getting the H31-161 Exam Study Guide certification by taking an exam. However, the exam is very difficult for a lot of people. Especially if you do not choose the correct study materials and find a suitable way, it will be more difficult for you to pass the exam and get the Huawei related certification.

Huawei H31-161 Exam Study Guide - We can receive numerous warm feedbacks every day.

Our H31-161 Exam Study Guide exam quiz is unlike other exam materials that are available on the market, our H31-161 Exam Study Guide study dumps specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time. So you can achieve your H31-161 Exam Study Guide certification easily without disrupting your daily routine. And we will give you 100% success guaranteed on the H31-161 Exam Study Guide training guide.

When you want to correct the answer after you finish learning, the correct answer for our H31-161 Exam Study Guide test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the H31-161 Exam Study Guide exam torrent, and you can flexibly and freely choose these two modes according to your habit.

H31-161 PDF DEMO:

QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C

QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B

QUESTION NO: 3
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E

QUESTION NO: 4
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D

QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C

ISACA CISM-CN - Once you choose our learning materials, your dream that you have always been eager to get Huawei certification which can prove your abilities will realized. VMware 1V0-41.20 - Everybody knows that in every area, timing counts importantly. Huawei H20-421_V1.0 - Many company requests candidates not only have work experiences, but also some professional certifications. Our IBM C1000-182 exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the IBM C1000-182 certification successfully. And our professional EMC D-SF-A-24 study materials determine the high pass rate.

Updated: May 27, 2022