We attract customers by our fabulous H31-161 Exam Dumps Collection certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our H31-161 Exam Dumps Collection test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the HCIE-Carrier IP (Written) learn tool compiled by our company are definitely the best choice for you. Imagine, if you're using a H31-161 Exam Dumps Collection practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the H31-161 Exam Dumps Collection test material can avoid these risks very well. All in all, high efficiency of H31-161 Exam Dumps Collection exam material is the reason for your selection.
HCIE-Carrier IP H31-161 Our experts have taken your worries seriously.
The content system of H31-161 - HCIE-Carrier IP (Written) Exam Dumps Collection exam simulation is constructed by experts. You can download the electronic invoice of the H31-161 Reliable Exam Collection Sheet study materials and reserve it. Once you have decided to purchase our H31-161 Reliable Exam Collection Sheet study materials, you can add it to your cart.
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of H31-161 Exam Dumps Collection training questions, you will agree with what I said. What our H31-161 Exam Dumps Collection study materials contain are all the real questions and answers that will come out in the real exam. As long as you study with our H31-161 Exam Dumps Collection exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure.
Huawei H31-161 Exam Dumps Collection - Many people think this is incredible.
We have chosen a large number of professionals to make H31-161 Exam Dumps Collection learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from H31-161 Exam Dumps Collection exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our H31-161 Exam Dumps Collection test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose H31-161 Exam Dumps Collection test guide to get you closer to success.
The comprehensive coverage would be beneficial for you to pass the exam. Only need to spend about 20-30 hours practicing our H31-161 Exam Dumps Collection study files can you be fully prepared for the exam.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 3
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 4
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
But our IAPP AIGP exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. There are many benefits after you pass the Microsoft MS-721 certification such as you can enter in the big company and double your wage. SAP P_S4FIN_2023 - Time is so important to everyone because we have to use our limited time to do many things. And you will find that it is easy to understand the content of the PRINCE2 PRINCE2-Foundation learning guide for our experts have simplified the questions and answers. Salesforce Marketing-Cloud-Email-Specialist - No matter what your previous learning level is, there will be no problem of understanding.
Updated: May 27, 2022