Though our H31-161 Associate Level Exam training guide is proved to have high pass rate, but If you try our H31-161 Associate Level Exam exam questions but fail in the final exam, we can refund the fees in full only if you provide us with a transcript or other proof that you failed the exam. We believe that our business will last only if we treat our customers with sincerity and considerate service. So, please give the H31-161 Associate Level Exam study materials a chance to help you. It is very flexible for you to use the three versions of the H31-161 Associate Level Exam study materials to preparing for your coming exam. According to the needs of all people, the experts and professors in our company designed three different versions of the H31-161 Associate Level Exam study materials for all customers. Such as app version, you can learn it using your phone everywhere without the limitation of place or time.
HCIE-Carrier IP H31-161 I wish you good luck.
HCIE-Carrier IP H31-161 Associate Level Exam - HCIE-Carrier IP (Written) You can download the part of the trial exam questions and answers as a try. If you fail the exam, we will give a full refund to you. We all know that in the fiercely competitive IT industry, having some IT authentication certificates is very necessary.
The exam materiala of the Omgzlook Huawei H31-161 Associate Level Exam is specifically designed for candicates. It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value.
Huawei H31-161 Associate Level Exam - Come on, you will be the next best IT experts.
Huawei H31-161 Associate Level Exam certification exam is among those popular IT certifications. It is also the dream of ambitious IT professionals. This part of the candidates need to be fully prepared to allow them to get the highest score in the H31-161 Associate Level Exam exam, make their own configuration files compatible with market demand.
If you won't believe us, you can visit our Omgzlook to experience it. And then, I am sure you must choose Omgzlook exam dumps.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
Omgzlook's Huawei H3C GB0-372-ENU exam training materials are bring the greatest success rate to all the candicates who want to pass the exam. Would you like to attend Huawei SAP C_TS410_2022 certification exam? Certainly a lot of people around you attend this exam. CompTIA PT0-003 - We absolutely protect the interests of consumers. Microsoft SC-900 - Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method. Microsoft AZ-204-KR - The coverage of the products of Omgzlook is very broad.
Updated: May 27, 2022