350-401 Vce Exam Simulator exam materials contain all the questions and answers to pass 350-401 Vce Exam Simulator exam on first try. The Questions & answers are verified and selected by professionals in the field and ensure accuracy and efficiency throughout the whole Product. You will not need to collect additional questions and answers from any other source because this package contains every detail that you need to pass 350-401 Vce Exam Simulator exam. Our 350-401 Vce Exam Simulator real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. At the same time, our 350-401 Vce Exam Simulator exam materials have been kind enough to prepare the App version for you, so that you can download our 350-401 Vce Exam Simulator practice prep to any electronic device, and then you can take all the learning materials with you and review no matter where you are. Without doubt, you will get what you expect to achieve, no matter your satisfied scores or according 350-401 Vce Exam Simulatorcertification file.
CCNP Enterprise 350-401 Do not be afraid of making positive changes.
Unlike some irresponsible companies who churn out some 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Vce Exam Simulator study guide, we are looking forward to cooperate fervently. Omgzlook will provide all the latest and accurate exam practice questions and answers for the staff to participate in Latest Test Guide 350-401 Materials certification exam. Omgzlook is a professional website to specially provide training tools for IT certification exams and a good choice to help you pass Latest Test Guide 350-401 Materials exam,too.
As far as our 350-401 Vce Exam Simulator study guide is concerned, the PDF version brings you much convenience with regard to the following advantage. The PDF version of our 350-401 Vce Exam Simulator learning materials contain demo where a part of questions selected from the entire version of our 350-401 Vce Exam Simulator exam quiz is contained. In this way, you have a general understanding of our 350-401 Vce Exam Simulator actual prep exam, which must be beneficial for your choice of your suitable exam files.
Cisco 350-401 Vce Exam Simulator - Select the materials is to choose what you want.
Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry. But the thing is not so easy for them they need many efforts to achieve their goals. Passing the test 350-401 Vce Exam Simulator certification can make them become that kind of people and if you are one of them buying our 350-401 Vce Exam Simulator study materials will help you pass the 350-401 Vce Exam Simulator test smoothly with few efforts needed.
It was a Xi'an coach byword that if you give up, the game is over at the same time. The game likes this, so is the exam.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Absorbing the lessons of the HP HPE0-V28-KR test prep, will be all kinds of qualification examination classify layout, at the same time on the front page of the HP HPE0-V28-KR test materials have clear test module classification, so clear page design greatly convenient for the users, can let users in a very short period of time to find what they want to study, and then targeted to study. SAP C-IEE2E-2404 - Or you can choose to free update your exam dumps. SAP E-ACTAI-2403 - Being considered the most authentic brand in this career, our professional experts are making unremitting efforts to provide our customers the latest and valid {CertName} exam simulation. You will find some exam techniques about how to pass Scaled Agile SAFe-Agilist exam from the exam materials and question-answer analysis provided by our Omgzlook. But we can help all of these candidates on SAP C_ACT_2403 study questions.
Updated: May 28, 2022