Our experts offer help by diligently working on the content of 350-401 Valid Test Vce learning questions more and more accurate. Being an exam candidate in this area, we believe after passing the exam by the help of our 350-401 Valid Test Vce practice materials, you will only learn a lot from this 350-401 Valid Test Vce exam but can handle many problems emerging in a long run. You can much more benefited form our 350-401 Valid Test Vce study guide. With the help of our hardworking experts, our 350-401 Valid Test Vce exam braindumps have been on the front-front of this industry and help exam candidates around the world win in valuable time. With years of experience dealing with exam, they have thorough grasp of knowledge which appears clearly in our 350-401 Valid Test Vce actual exam. But the 350-401 Valid Test Vce test prep we provide are compiled elaborately and it makes you use less time and energy to learn and provide the study materials of high quality and seizes the focus the exam.
CCNP Enterprise 350-401 Why not have a try?
If there is new information about the exam, you will receive an email about the newest information about the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Vce learning dumps. With our Valid 350-401 Exam Voucher exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform.
Although the three major versions of our 350-401 Valid Test Vce exam dumps provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality. The most important feature of the online version of our 350-401 Valid Test Vce learning materials are practicality. The online version is open to all electronic devices, which will allow your device to have common browser functionality so that you can open our products.
Cisco 350-401 Valid Test Vce - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 350-401 Valid Test Vce preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 350-401 Valid Test Vce study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 350-401 Valid Test Vce certification.
Once you choose our training materials, you chose hope. Our learning materials are based on the customer's point of view and fully consider the needs of our customers.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
Cisco 300-445 - The client only need to spare 1-2 hours to learn our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question each day or learn them in the weekends. Salesforce Mobile-Solutions-Architecture-Designer - We just want to provide you with the best service. Microsoft AZ-104-KR - As a matter of fact, we receive thousands of the warm feedbacks to thank us for helping them pass the exam. Omgzlook is famous for our company made these Salesforce Marketing-Cloud-Account-Engagement-Specialist exam questions with accountability. But our ISM CORe study guide will offer you the most professional guidance.
Updated: May 28, 2022