Although the 350-401 Valid Test Tips exam prep is of great importance, you do not need to be over concerned about it. With scientific review and arrangement from professional experts as your backup, and the most accurate and high quality content of our 350-401 Valid Test Tips study materials, you will cope with it like a piece of cake. So our 350-401 Valid Test Tips learning questions will be your indispensable practice materials during your way to success. There is an old saying goes, the customer is king, so we follow this principle with dedication to achieve high customer satisfaction on our 350-401 Valid Test Tips exam questions. First of all, you are able to make full use of our 350-401 Valid Test Tips learning dumps through three different versions: PDF, PC and APP online version. And they are the masterpieces of processional expertise these area with reasonable prices.
CCNP Enterprise 350-401 You will not need to struggle with the exam.
CCNP Enterprise 350-401 Valid Test Tips - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Regarding the process of globalization, every fighter who seeks a better life needs to keep pace with its tendency to meet challenges. Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase.
More detailed information is under below. We are pleased that you can spare some time to have a look for your reference about our 350-401 Valid Test Tips test prep. As long as you spare one or two hours a day to study with our latest 350-401 Valid Test Tips quiz prep, we assure that you will have a good command of the relevant knowledge before taking the exam.
Cisco 350-401 Valid Test Tips - Why not have a try?
As is known to us, getting the newest information is very important for all people to pass the exam and get the certification in the shortest time. In order to help all customers gain the newest information about the 350-401 Valid Test Tips exam, the experts and professors from our company designed the best Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test guide. The experts will update the system every day. If there is new information about the exam, you will receive an email about the newest information about the 350-401 Valid Test Tips learning dumps. We can promise that you will never miss the important information about the exam.
With our 350-401 Valid Test Tips exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CompTIA PT0-003 - The online version is open to all electronic devices, which will allow your device to have common browser functionality so that you can open our products. Simple text messages, deserve to go up colorful stories and pictures beauty, make the EMC D-GAI-F-01 test guide better meet the zero basis for beginners, let them in the relaxed happy atmosphere to learn more useful knowledge, more good combined with practical, so as to achieve the state of unity. Microsoft DP-420 - The Internet is increasingly becoming a platform for us to work and learn, while many products are unreasonable in web design, and too much information is not properly classified. Therefore, getting the test CompTIA CV0-004 certification is of vital importance to our future employment. APICS CSCP-KR - Some of these users have already purchased a lot of information.
Updated: May 28, 2022