We suggest you choose our 350-401 Valid Test Question test prep ----an exam braindump leader in the field. Since we release the first set of the 350-401 Valid Test Question quiz guide, we have won good response from our customers and until now---a decade later, our products have become more mature and win more recognition. Therefore, for expressing our gratitude towards the masses of candidates’ trust, our 350-401 Valid Test Question exam torrent will also be sold at a discount and many preferential activities are waiting for you. And we will try our best to satisfy our customers with better quatily and services. Our loyal customers give our 350-401 Valid Test Question exam materials strong support. How to get the test 350-401 Valid Test Question certification in a short time, which determines enough qualification certificates to test our learning ability and application level.
CCNP Enterprise 350-401 Omgzlook allows you to have a bright future.
CCNP Enterprise 350-401 Valid Test Question - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns. To pass the Cisco New 350-401 Test Sample exam is a dream who are engaged in IT industry. If you want to change the dream into reality, you only need to choose the professional training.
We can proudly claim that you can successfully pass the exam just on the condition that you study with our 350-401 Valid Test Question preparation materials for 20 to 30 hours. And not only you will get the most rewards but also you will get an amazing study experience by our 350-401 Valid Test Question exam questions. For we have three different versions of our 350-401 Valid Test Question study guide, and you will have different feelings if you have a try on them.
So are our Cisco 350-401 Valid Test Question exam braindumps!
Our 350-401 Valid Test Question training materials are regarded as the most excellent practice materials by authority. Our company is dedicated to researching, manufacturing, selling and service of the 350-401 Valid Test Question study guide. Also, we have our own research center and experts team. So our products can quickly meet the new demands of customers. That is why our 350-401 Valid Test Question exam questions are popular among candidates. we have strong strenght to support our 350-401 Valid Test Question practice engine.
There are so many advantages of our 350-401 Valid Test Question actual exam, and you are welcome to have a try! We have put substantial amount of money and effort into upgrading the quality of our 350-401 Valid Test Question preparation materials, into our own 350-401 Valid Test Question sales force and into our after sale services.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft MB-310 - Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. No other EMC D-PSC-MN-01 study materials or study dumps can bring you the knowledge and preparation that you will get from the EMC D-PSC-MN-01 study materials available only from Omgzlook. So you will never have to worry that the exam questions and answers will be outdated one day for our experts are always keeping on updating the CompTIA SY0-701 study materials to the most precise. IIA IIA-CIA-Part2-KR - So you won’t be pestered with the difficulties of the exam any more. Omgzlook will provide all the latest and accurate exam practice questions and answers for the staff to participate in Network Appliance NS0-404 certification exam.
Updated: May 28, 2022