And our 350-401 Valid Exam Sample exam dumps also add vivid examples and accurate charts to stimulate those exceptional cases you may be confronted with. You can rely on our 350-401 Valid Exam Sample test questions, and we’ll do the utmost to help you succeed. Research indicates that the success of our highly-praised 350-401 Valid Exam Sample test questions owes to our endless efforts for the easily operated practice system. It will help you to accelerate your knowledge and improve your professional ability by using our 350-401 Valid Exam Sample vce dumps. We are so proud of helping our candidates go through 350-401 Valid Exam Sample real exam in their first attempt quickly. First, you can see the high hit rate on the website that can straightly proved our 350-401 Valid Exam Sample study braindumps are famous all over the world.
So are our 350-401 Valid Exam Sample exam braindumps!
CCNP Enterprise 350-401 Valid Exam Sample - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Also, we have our own research center and experts team. This is built on our in-depth knowledge of our customers, what they want and what they need. It is based on our brand, if you read the website carefully, you will get a strong impression of our brand and what we stand for.
So, high quality and high accuracy rate 350-401 Valid Exam Sample practice materials are your ideal choice this time. By adding all important points into 350-401 Valid Exam Sample practice materials with attached services supporting your access of the newest and trendiest knowledge, our 350-401 Valid Exam Sample practice materials are quite suitable for you right now. Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process.
Cisco 350-401 Valid Exam Sample - You can totally relay on us.
Quality should be tested by time and quantity, which is also the guarantee that we give you to provide 350-401 Valid Exam Sample exam software for you. Continuous update of the exam questions, and professional analysis from our professional team have become the key for most candidates to pass 350-401 Valid Exam Sample exam. The promise of "no help, full refund" is the motivation of our team. We will continue improving 350-401 Valid Exam Sample exam study materials. We will guarantee that you you can share the latest 350-401 Valid Exam Sample exam study materials free during one year after your payment.
Second, it is convenient for you to read and make notes with our versions of 350-401 Valid Exam Sample exam materials. Last but not least, we will provide considerate on line after sale service for you in twenty four hours a day, seven days a week.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Fortinet FCP_FWF_AD-7.4 - To pass this exam also needs a lot of preparation. After nearly ten years' efforts, now our company have become the topnotch one in the field, therefore, if you want to pass the Axis ANVE exam as well as getting the related certification at a great ease, I strongly believe that the Axis ANVE study materials compiled by our company is your solid choice. If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our Scrum PAL-I exam test engine to practice. It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related SAP C-ARSUM-2404 certification is the best way to show our professional ability, however, the SAP C-ARSUM-2404 exam is hard nut to crack but our SAP C-ARSUM-2404 preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the SAP C-ARSUM-2404 exam. Improve your professional ability with our SAP C_S43_2023 certification.
Updated: May 28, 2022