If you free download the demos of the 350-401 Valid Dumps Pdf exam questions, I believe you have a deeper understanding of our products, and we must also trust our 350-401 Valid Dumps Pdf learning quiz. Our products can provide you with the high efficiency and high quality you need. Selecting our study materials is your rightful assistant with internationally recognized 350-401 Valid Dumps Pdf certification. So you might worry about that the 350-401 Valid Dumps Pdf certification materials are not suitable for you. Try to believe us. If you encounter some problems when using our 350-401 Valid Dumps Pdf study materials, you can also get them at any time.
CCNP Enterprise 350-401 So Omgzlook a website worthy of your trust.
CCNP Enterprise 350-401 Valid Dumps Pdf - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. Do not spend too much time and money, as long as you have Omgzlook learning materials you will easily pass the exam. In order to help you more Omgzlook the Cisco 350-401 Valid Dumps Book exam eliminate tension of the candidates on the Internet.
Be supportive to offline exercise on the condition that you practice it without mobile data. According to personal propensity and various understanding level of exam candidates, we have three versions of 350-401 Valid Dumps Pdf practice materials for your reference. Here are the respective features and detailed disparities of our 350-401 Valid Dumps Pdf practice materials.
Cisco 350-401 Valid Dumps Pdf - You can experience it in advance.
In order to meet the request of current real test, the technology team of research on Omgzlook Cisco 350-401 Valid Dumps Pdf exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect Omgzlook Cisco 350-401 Valid Dumps Pdf exam materials. This allows Omgzlook to always have the materials of highest quality.
If you still worry about your 350-401 Valid Dumps Pdf exam; if you still doubt whether it is worthy of purchasing our software, what you can do to clarify your doubts is to download our 350-401 Valid Dumps Pdf free demo. Once you have checked our demo, you will find the study materials we provide are what you want most.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Then you can try the Omgzlook's Cisco Salesforce OmniStudio-Consultant exam training materials. Our Huawei H13-821_V3.0-ENU exam software is developed by our IT elite through analyzing real Huawei H13-821_V3.0-ENU exam content for years, and there are three version including PDF version, online version and software version for you to choose. Do you want to pass the Cisco Microsoft MS-900 exam better and faster? Then please select the Omgzlook. We constantly updated the IBM S2000-020 exam materials at the same time with the exam update. Will you seize Omgzlook to make you achievement? Omgzlook Cisco Fortinet NSE7_OTS-7.2 certification training materials will guarantee your success.
Updated: May 28, 2022