350-401 Valid Dumps Free study materials like a mini boot camp, you'll be prepared for 350-401 Valid Dumps Free test and guaranteed you to get the certificate you have been struggling to. The product here of {CertName} test, is cheaper, better and higher quality; you can learn 350-401 Valid Dumps Free skills and theory at your own pace; you will save more time and energy. No other 350-401 Valid Dumps Free study materials or study dumps will bring you the knowledge and preparation that you will get from the 350-401 Valid Dumps Free study materials available only from Omgzlook. Our 350-401 Valid Dumps Free preparation materials contain three versions: the PDF, the Software and the APP online. They give you different experience on trying out according to your interests and hobbies. They are the versions of the PDF, Software and APP online.
CCNP Enterprise 350-401 We strongly advise you to have a brave attempt.
Over the years, 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Dumps Free exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. If you want to find a desirable job, you must rely on your ability to get the job. Now, our 350-401 Valid Exam Discount Voucher training materials will help you master the popular skills in the office.
But if the clients buy our 350-401 Valid Dumps Free training quiz they can immediately use our product and save their time. And the quality of our exam dumps are very high! The procedures of buying our 350-401 Valid Dumps Free study materials are simple and save the clients’ time.
Cisco 350-401 Valid Dumps Free - We guarantee you 100% certified.
When you decide to pass the 350-401 Valid Dumps Free exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our 350-401 Valid Dumps Free prep guide to you, because we believe this is what you have been looking for. Moreover we are committed to offer you with data protect act and guarantee you will not suffer from virus intrusion and information leakage after purchasing our 350-401 Valid Dumps Free guide torrent. The last but not least we have professional groups providing guidance in terms of download and installment remotely.
If you also have a IT dream, quickly put it into reality. Select Omgzlook's Cisco 350-401 Valid Dumps Free exam training materials, and it is absolutely trustworthy.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft AZ-801 - You may try it! Amazon AIF-C01 - Everyone has a utopian dream in own heart. H3C GB0-372-ENU - The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge. This is the royal road to pass Fortinet FCSS_SOC_AN-7.4 exam. CompTIA SY0-701 practice materials are typically seen as the tools of reviving, practicing and remembering necessary exam questions for the exam, spending much time on them you may improve the chance of winning.
Updated: May 28, 2022