If the 350-401 Valid Braindumps Free exam is coming and the time is tense, it is better to choose our 350-401 Valid Braindumps Free test engine dumps. 350-401 Valid Braindumps Free test engine can simulate the actual test during the preparation and record the wrong questions for our reviewing. You just need 20-30 hours for preparation and feel confident to face the 350-401 Valid Braindumps Free actual test. And so many of our loyal customers have achieved their dreams with the help of our 350-401 Valid Braindumps Free exam questions. Your aspiring wishes such as promotion chance, or higher salaries or acceptance from classmates or managers and so on. Immediately after you have made a purchase for our 350-401 Valid Braindumps Free practice dumps, you can download our 350-401 Valid Braindumps Free study materials to make preparations.
CCNP Enterprise 350-401 Omgzlook allows you to have a bright future.
CCNP Enterprise 350-401 Valid Braindumps Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns. To pass the Cisco Latest 350-401 Braindumps Questions exam is a dream who are engaged in IT industry. If you want to change the dream into reality, you only need to choose the professional training.
We can proudly claim that you can successfully pass the exam just on the condition that you study with our 350-401 Valid Braindumps Free preparation materials for 20 to 30 hours. And not only you will get the most rewards but also you will get an amazing study experience by our 350-401 Valid Braindumps Free exam questions. For we have three different versions of our 350-401 Valid Braindumps Free study guide, and you will have different feelings if you have a try on them.
Cisco 350-401 Valid Braindumps Free - Stop hesitating.
Research indicates that the success of our highly-praised 350-401 Valid Braindumps Free test questions owes to our endless efforts for the easily operated practice system. Most feedback received from our candidates tell the truth that our 350-401 Valid Braindumps Free guide torrent implement good practices, systems as well as strengthen our ability to launch newer and more competitive products. Accompanying with our 350-401 Valid Braindumps Free exam dumps, we educate our candidates with less complicated Q&A but more essential information, which in a way makes you acquire more knowledge and enhance your self-cultivation. And our 350-401 Valid Braindumps Free exam dumps also add vivid examples and accurate charts to stimulate those exceptional cases you may be confronted with. You can rely on our 350-401 Valid Braindumps Free test questions, and we’ll do the utmost to help you succeed.
The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate 350-401 Valid Braindumps Free dumps torrent which are the best for passing certification test.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
First, you can see the high hit rate on the website that can straightly proved our Dell D-PWF-DY-A-00 study braindumps are famous all over the world. By using our online training, you may rest assured that you grasp the key points of Adobe AD0-E328 dumps torrent for the practice test. Fortinet NSE5_FSM-6.3 - Though the content of these three versions is the same, but their displays are different. With the help of our study guide, you will save lots of time to practice Palo Alto Networks PSE-PrismaCloud vce pdf and boost confidence in solving the difficult questions. You should take the look at our Oracle 1z0-915-1 simulating questions right now.
Updated: May 28, 2022