Before you choose our 350-401 Training For Exam study material, you can try our 350-401 Training For Exam free demo for assessment. For a better idea you can also read 350-401 Training For Exam testimonials from our previous customers at the bottom of our product page to judge the validity. Our updated and useful 350-401 Training For Exam will be the best tool for your success. In recent years, fierce competition agitates the forwarding IT industry in the world. And IT certification has become a necessity. Just only dozens of money on 350-401 Training For Exam latest study guide will assist you 100% pass exam and 24-hours worm aid service.
Actually, 350-401 Training For Exam exam really make you anxious.
After our unremitting efforts, 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Training For Exam learning guide comes in everybody's expectation. Every version of Reliable 350-401 Test Vce study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real Reliable 350-401 Test Vce exam environment to let you have more real feeling to Reliable 350-401 Test Vce real exam, besides the software version can be available installed on unlimited number devices.
By passing the exams multiple times on practice test software, you will be able to pass the real 350-401 Training For Exam test in the first attempt. With our 350-401 Training For Exam practice test software, you can simply assess yourself by going through the 350-401 Training For Exam practice tests. We highly recommend going through the 350-401 Training For Exam answers multiple times so you can assess your preparation for the 350-401 Training For Exam exam.
Our Cisco 350-401 Training For Exam free demo is available for all of you.
Our 350-401 Training For Exam training materials have won great success in the market. Tens of thousands of the candidates are learning on our 350-401 Training For Exam practice engine. First of all, our 350-401 Training For Exam study dumps cover all related tests about computers. It will be easy for you to find your prepared learning material. If you are suspicious of our 350-401 Training For Exam exam questions, you can download the free demo from our official websites.
Our website always trying to bring great convenience to our candidates who are going to attend the 350-401 Training For Exam practice test. You can practice our 350-401 Training For Exam dumps demo in any electronic equipment with our online test engine.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Just come and have a try on our SAP C_HAMOD_2404 study questions! EMC D-AV-OE-23 - You can study any time anywhere you want. Therefore, you are able to get hang of the essential points in a shorter time compared to those who are not willing to use our Fortinet FCSS_NST_SE-7.4 exam torrent. The most important is that our test engine enables you practice Fortinet NSE7_NST-7.2 exam pdf on the exact pattern of the actual exam. Passing a Google ChromeOS-Administrator exam to get a certificate will help you to look for a better job and get a higher salary.
Updated: May 28, 2022