To keep you updated with latest changes in the 350-401 Test Simulator Online test questions, we offer one-year free updates in the form of new questions according to the requirement of 350-401 Test Simulator Online real exam. Updated 350-401 Test Simulator Online vce dumps ensure the accuracy of learning materials and guarantee success of in your first attempt. Why not let our 350-401 Test Simulator Online dumps torrent help you to pass your exam without spending huge amount of money. Our experts will check whether there is an update every day, so you needn’t worry about the accuracy of 350-401 Test Simulator Online study materials. If there is an update system, we will send them to the customer automatically. Omgzlook enjoys the reputation of a reliable study material provider to those professionals who are keen to meet the challenges of industry and work hard to secure their positions in it.
CCNP Enterprise 350-401 Moreover, we have Demos as freebies.
CCNP Enterprise 350-401 Test Simulator Online - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Though the content of these three versions is the same, the displays have their different advantages. We believe that you will like our products. According to the different demands from customers, the experts and professors designed three different versions for all customers.
As we will find that, get the test 350-401 Test Simulator Online certification, acquire the qualification of as much as possible to our employment effect is significant. But how to get the test 350-401 Test Simulator Online certification didn't own a set of methods, and cost a lot of time to do something that has no value. With our 350-401 Test Simulator Online exam Practice, you will feel much relax for the advantages of high-efficiency and accurate positioning on the content and formats according to the candidates’ interests and hobbies.
Cisco 350-401 Test Simulator Online - As for us, the customer is God.
We can say that how many the 350-401 Test Simulator Online certifications you get and obtain qualification certificates, to some extent determines your future employment and development, as a result, the 350-401 Test Simulator Online exam guide is committed to helping you become a competitive workforce, let you have no trouble back at home. Actually, just think of our 350-401 Test Simulator Online test prep as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time.
Thus we offer discounts from time to time, and you can get 50% discount at the second time you buy our 350-401 Test Simulator Online question dumps after a year. Lower price with higher quality, that’s the reason why you should choose our 350-401 Test Simulator Online prep guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
We can claim that with our APMG-International AgilePM-Foundation practice engine for 20 to 30 hours, you will be ready to pass the exam with confidence. Our APICS CSCP exam questions are compiled by experts and approved by authorized personnel and boost varied function so that you can learn APICS CSCP test torrent conveniently and efficiently. APMG-International AgilePM-Practitioner - All in all, abandon all illusions and face up to reality bravely. However, it’s not easy for those work officers who has less free time to prepare such an IIA IIA-CIA-Part1 exam. Not only we offer the best SAP C-TS462-2023 training prep, but also our sincere and considerate attitude is praised by numerous of our customers.
Updated: May 28, 2022