Our study materials allow users to use the 350-401 Test Cram Review certification guide for free to help users better understand our products better. Even if you find that part of it is not for you, you can still choose other types of learning materials in our study materials. We can meet all your requirements and solve all your problems by our 350-401 Test Cram Review certification guide. Besides, the simulate test environment will help you to be familiar with the 350-401 Test Cram Review actual test. With the 350-401 Test Cram Review test engine, you can practice until you make the test all correct. If you are really in doubt, you can use our trial version of our 350-401 Test Cram Review exam questions first.
So are our 350-401 Test Cram Review exam braindumps!
CCNP Enterprise 350-401 Test Cram Review - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Also, we have our own research center and experts team. This is built on our in-depth knowledge of our customers, what they want and what they need. It is based on our brand, if you read the website carefully, you will get a strong impression of our brand and what we stand for.
So, high quality and high accuracy rate 350-401 Test Cram Review practice materials are your ideal choice this time. By adding all important points into 350-401 Test Cram Review practice materials with attached services supporting your access of the newest and trendiest knowledge, our 350-401 Test Cram Review practice materials are quite suitable for you right now. Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process.
Cisco 350-401 Test Cram Review - Omgzlook is a great resource site.
Our 350-401 Test Cram Review real quiz boosts 3 versions: the PDF, the Softwate and the APP online which will satisfy our customers by their varied functions to make you learn comprehensively and efficiently. The learning of our 350-401 Test Cram Review study materials costs you little time and energy and we update them frequently. We can claim that you will be ready to write your exam after studying with our 350-401 Test Cram Review exam guide for 20 to 30 hours. To understand our 350-401 Test Cram Review learning questions in detail, just come and try!
It is also a reflection of the pressure of modern society. We should use the strength to prove ourselves.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Passing the test VMware 2V0-33.22PSE certification can make them become that kind of people and if you are one of them buying our VMware 2V0-33.22PSE study materials will help you pass the VMware 2V0-33.22PSE test smoothly with few efforts needed. SAP C_TS422_2023 - It was a Xi'an coach byword that if you give up, the game is over at the same time. Absorbing the lessons of the CompTIA SY0-601 test prep, will be all kinds of qualification examination classify layout, at the same time on the front page of the CompTIA SY0-601 test materials have clear test module classification, so clear page design greatly convenient for the users, can let users in a very short period of time to find what they want to study, and then targeted to study. Omgzlook Cisco Fortinet NSE7_PBC-7.2 dumps are validated by many more candidates, which can guarantee a high success rate. Passing the SAP C-WZADM-2404 and obtaining the certificate may be the fastest and most direct way to change your position and achieve your goal.
Updated: May 28, 2022