You need to concentrate on memorizing the wrong questions. Our 350-401 Reliable Test Test learning questions have its own advantage. In order to make sure you have answered all questions, we have answer list to help you check. We promise during the process of installment and payment of our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prep torrent, the security of your computer or cellphone can be guaranteed, which means that you will be not afraid of virus intrusion and personal information leakage. Besides we have the right to protect your email address and not release your details to the 3rd parties. You cannot always stay in one place.
CCNP Enterprise 350-401 Time and tide wait for no man.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Test Test certification exam training tools contains the latest studied materials of the exam supplied by IT experts. Our Valid 350-401 Exam Papers practice materials are suitable to exam candidates of different levels. And after using our Valid 350-401 Exam Papers learning prep, they all have marked change in personal capacity to deal with the Valid 350-401 Exam Papers exam intellectually.
The industrious Omgzlook's IT experts through their own expertise and experience continuously produce the latest Cisco 350-401 Reliable Test Test training materials to facilitate IT professionals to pass the Cisco certification 350-401 Reliable Test Test exam. The certification of Cisco 350-401 Reliable Test Test more and more valuable in the IT area and a lot people use the products of Omgzlook to pass Cisco certification 350-401 Reliable Test Test exam. Through so many feedbacks of these products, our Omgzlook products prove to be trusted.
Cisco 350-401 Reliable Test Test - We provide one –year free updates; 3.
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our 350-401 Reliable Test Test exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our 350-401 Reliable Test Test study materials. And most of all, you will get reward by our 350-401 Reliable Test Test training engine in the least time with little effort.
If you master all key knowledge points, you get a wonderful score. If you choose our 350-401 Reliable Test Test exam review questions, you can share fast download.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
It is known to us that more and more companies start to pay high attention to the IIA IIA-CIA-Part2-KR certification of the candidates. We offer you the most accurate Dell D-HCIAZ-A-01 exam answers that will be your key to pass the certification exam in your first try. After a long period of research and development, our GitHub GitHub-Foundations test questions have been the leader study materials in the field. Preparing for the EMC D-PST-OE-23 real exam is easier if you can select the right test questions and be sure of the answers. And you can free download the demos of the Huawei H12-811_V1.0 learning quiz.
Updated: May 28, 2022