At the same time, as long as the user ensures that the network is stable when using our 350-401 Reliable Test Test training materials, all the operations of the learning material of can be applied perfectly. In order to save a lot of unnecessary trouble to users, we have completed our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions research and development of online learning platform, users do not need to download and install, only need your digital devices have a browser, can be done online operation of the 350-401 Reliable Test Test test guide. This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification. We can ensure you a pass rate as high as 99%! The experts in our company have been focusing on the 350-401 Reliable Test Test examination for a long time and they never overlook any new knowledge. What you can get from the 350-401 Reliable Test Test certification? Of course, you can get a lot of opportunities to enter to the bigger companies.
CCNP Enterprise 350-401 So our customers can pass the exam with ease.
Our APP online version of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Test Test exam questions has the advantage of supporting all electronic equipment. If you like to use computer to learn, you can use the Software and the APP online versions of the Valid 350-401 Exam Camp Sheet exam questions. If you like to write your own experience while studying, you can choose the PDF version of the Valid 350-401 Exam Camp Sheet study materials.
Our 350-401 Reliable Test Test preparation exam will be very useful for you if you are going to take the exam. So if you buy our 350-401 Reliable Test Test guide quiz, it will help you pass your exam and get the certification in a short time, and you will find that our 350-401 Reliable Test Test study materials are good value for money. Besides, you can enjoy the best after-sales service.
All the help provided by Cisco 350-401 Reliable Test Test test prep is free.
In order to meet the needs of all customers that pass their exam and get related certification, the experts of our company have designed the updating system for all customers. Our 350-401 Reliable Test Test exam question will be constantly updated every day. The IT experts of our company will be responsible for checking whether our 350-401 Reliable Test Test exam prep is updated or not. Once our 350-401 Reliable Test Test test questions are updated, our system will send the message to our customers immediately. If you use our 350-401 Reliable Test Test exam prep, you will have the opportunity to enjoy our updating system. You will get the newest information about your exam in the shortest time. You do not need to worry about that you will miss the important information, more importantly, the updating system is free for you, so hurry to buy our 350-401 Reliable Test Test exam question, you will find it is a best choice for you.
Please follow your heart. In a knowledge-based job market, learning is your quickest pathway, your best investment.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Oracle 1z0-1127-24 - Remember this version support Windows system users only. Salesforce MuleSoft-Integration-Associate - Your convenience and demands also deserve our deep consideration. Get the test IBM C1000-168 certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so IBM C1000-168 exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. All our team of experts and service staff are waiting for your mail on the Microsoft DP-900-KR exam questions all the time. Cisco 300-425 - In other words, we will be your best helper.
Updated: May 28, 2022