We want to specify all details of various versions of our 350-401 Reliable Test Experience study materails. We have three versions of our 350-401 Reliable Test Experience exam braindumps: the PDF, Software and APP online. You can decide which one you prefer, when you made your decision and we believe your flaws will be amended and bring you favorable results even create chances with exact and accurate content of our 350-401 Reliable Test Experience learning guide. Rather than insulating from the requirements of the 350-401 Reliable Test Experience real exam, our 350-401 Reliable Test Experience practice materials closely co-related with it. And their degree of customer’s satisfaction is escalating. We will accompany you throughout the review process from the moment you buy 350-401 Reliable Test Experience real exam.
Our 350-401 Reliable Test Experience exam materials have plenty of advantages.
CCNP Enterprise 350-401 Reliable Test Experience - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) You can install it to as many computers as you need as long as the computer is in Windows system. Repeated attempts will sharpen your minds. Maybe our Valid 350-401 Test Questions learning quiz is suitable for you.
We have enough confidence in our products, so we can give a 100% refund guarantee to our customers. 350-401 Reliable Test Experience exam questions promise that if you fail to pass the exam successfully after purchasing our product, we are willing to provide you with a 100% full refund. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam tests are a high-quality product recognized by hundreds of industry experts.
Cisco 350-401 Reliable Test Experience - Please make a decision quickly.
Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate. What the certificate main? All kinds of the test 350-401 Reliable Test Experience certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the 350-401 Reliable Test Experience exam guide, because get the test 350-401 Reliable Test Experience certification is not an easy thing, so, a lot of people are looking for an efficient learning method. And here, fortunately, you have found the 350-401 Reliable Test Experience exam braindumps, a learning platform that can bring you unexpected experiences.
If you choose Omgzlook, success is not far away for you. And soon you can get Cisco certification 350-401 Reliable Test Experience exam certificate.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
So do not hesitate and buy our SAP C_BW4H_2404 preparation exam, you will benefit a lot from our products. EMC D-PEMX-DY-23 - Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. Fortinet NSE5_FSM-6.3 - Each format has distinct strength and shortcomings. You can free download part of Omgzlook's exercises and answers about Cisco certification Huawei H19-431_V1.0 exam as a try, then you will be more confident to choose our Omgzlook's products to prepare your Cisco certification Huawei H19-431_V1.0 exam. App/online version of Tableau TDS-C01 training materials can be suitable to all kinds of equipment or digital devices.
Updated: May 28, 2022