but also allows you to pass the exam successfully. So you have no reason not to choose it. IT certification candidates are mostly working people. Our 350-401 Reliable Learning Materials study materials may become your right man. Perhaps you have heard of our 350-401 Reliable Learning Materials exam braindumps. With the Omgzlook's Cisco 350-401 Reliable Learning Materials exam training materials, you will have better development in the IT industry.
CCNP Enterprise 350-401 We are committed to your success.
Based on the credibility in this industry, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Learning Materials study braindumps have occupied a relatively larger market share and stable sources of customers. At present, Cisco Reliable 350-401 Test Dumps Sheet exam is very popular. Do you want to get Cisco Reliable 350-401 Test Dumps Sheet certificate? If it is ok, don't hesitate to sign up for the exam.
Our 350-401 Reliable Learning Materials study braindumps are so popular in the market and among the candidates that is because that not only our 350-401 Reliable Learning Materials learning guide has high quality, but also our 350-401 Reliable Learning Materials practice quiz is priced reasonably, so we do not overcharge you at all. Meanwhile, our exam materials are demonstrably high effective to help you get the essence of the knowledge which was convoluted. As long as you study with our 350-401 Reliable Learning Materials exam questions for 20 to 30 hours, you will pass the exam for sure.
Now, Cisco 350-401 Reliable Learning Materials exam guide gives you this opportunity.
The time and energy are all very important for the office workers. In order to get the 350-401 Reliable Learning Materials certification with the less time and energy investment, you need a useful and valid Cisco study material for your preparation. 350-401 Reliable Learning Materials free download pdf will be the right material you find. The comprehensive contents of 350-401 Reliable Learning Materials practice torrent can satisfied your needs and help you solve the problem in the actual test easily. Now, choose our 350-401 Reliable Learning Materials study practice, you will get high scores.
With the cumulative effort over the past years, our 350-401 Reliable Learning Materials study guide has made great progress with passing rate up to 98 to 100 percent among the market. A lot of professional experts concentrate to making our 350-401 Reliable Learning Materialspreparation materials by compiling the content so they have gained reputation in the market for their proficiency and dedication.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Omgzlook will provide you the easiest and quickest way to get the EMC D-PST-OE-23 certification without headache. Our SAP C_THR82_2405 exam quiz will help you to deal with all the difficulties you have encountered in the learning process and make you walk more easily and happily on the road of studying. Cisco EMC D-PE-FN-23 exam cram PDF will be great helper for your coming exam definitely. SAP C_THR82_2405 - You will get more opportunities than others, and your dreams may really come true in the near future. SAP C_TS414_2023 - Then you can pass the actual test quickly and get certification easily.
Updated: May 28, 2022