The strength of our the IT elite team will make you feel incredible. You can try to free download part of the exam questions and answers about Cisco certification 350-401 Reliable Exam Simulations exam to measure the reliability of our Omgzlook. Our Omgzlook is a professional website to provide accurate exam material for a variety of IT certification exams. You can choose the device you feel convenient at any time. Our 350-401 Reliable Exam Simulations learning guide allows you to study anytime, anywhere. Omgzlook is a website to improve the pass rate of Cisco certification 350-401 Reliable Exam Simulations exam.
CCNP Enterprise 350-401 The free demo has three versions.
Even if you think that you can not pass the demanding Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Simulations exam. Where is a will, there is a way. And our 350-401 Testking Learning Materials exam questions are the exact way which can help you pass the exam and get the certification with ease.
To pass the exam is difficult but Omgzlook can help you to get Cisco 350-401 Reliable Exam Simulations certification. According to the survey, the candidates most want to take Cisco 350-401 Reliable Exam Simulations test in the current IT certification exams. Of course, the Cisco 350-401 Reliable Exam Simulations certification is a very important exam which has been certified.
Cisco 350-401 Reliable Exam Simulations - We provide free PDF demo for each exam.
Omgzlook IT Certification has years of training experience. Omgzlook Cisco 350-401 Reliable Exam Simulations exam training materials is a reliable product. IT elite team continue to provide our candidates with the latest version of the 350-401 Reliable Exam Simulations exam training materials. Our staff made great efforts to ensure that you always get good grades in examinations. To be sure, Omgzlook Cisco 350-401 Reliable Exam Simulations exam materials can provide you with the most practical IT certification material.
To pass the certification exam, you need to select right 350-401 Reliable Exam Simulations study guide and grasp the overall knowledge points of the real exam. The test questions from our 350-401 Reliable Exam Simulations dumps collection cover almost content of the exam requirement and the real exam.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Omgzlook's Cisco Huawei H19-308_V4.0 exam training materials is a pioneer in the Cisco Huawei H19-308_V4.0 exam certification preparation. Our website offer you the latest Salesforce CRT-211 dumps torrent in pdf version and test engine version, which selected according to your study habit. Cisco 300-630 - You can be successful as long as you make the right choices. Our Cisco 700-826 real dumps has received popular acceptance worldwide with tens of thousands of regular exam candidates who trust our proficiency. Fortinet ICS-SCADA - With this certification you will not be eliminated, and you will be a raise.
Updated: May 28, 2022