They always treat customers with courtesy and respect to satisfy your need on our 350-401 Reliable Exam Sims exam dumps. About the dynamic change of our 350-401 Reliable Exam Sims guide quiz, they will send the updates to your mailbox according to the trend of the exam. Besides, we understand you may encounter many problems such as payment or downloading 350-401 Reliable Exam Sims practice materials and so on, contact with us, we will be there. How can our 350-401 Reliable Exam Sims practice materials become salable products? Their quality with low prices is unquestionable. There are no better or cheaper practice materials can replace our 350-401 Reliable Exam Sims exam questions as alternatives while can provide the same functions. There is no doubt that the function can help you pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam.
It all starts from our 350-401 Reliable Exam Sims learning questions.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Sims study materials can satisfy their wishes and they only spare little time to prepare for exam. When you see other people in different industry who feel relaxed with high salary, do you want to try another field? And is the difficulty of learning a new piece of knowledge often deterring you? It doesn't matter, now Valid Study Questions 350-401 Free Download practice exam offers you a great opportunity to enter a new industry. Our Valid Study Questions 350-401 Free Download learning material was compiled from the wisdom and sweat of many industry experts.
Are you staying up for the 350-401 Reliable Exam Sims exam day and night? Do you have no free time to contact with your friends and families because of preparing for the exam? Are you tired of preparing for different kinds of exams? If your answer is yes, please buy our 350-401 Reliable Exam Sims exam questions, which is equipped with a high quality. We can make sure that our 350-401 Reliable Exam Sims study materials have the ability to help you solve your problem, and you will not be troubled by these questions above.
Cisco 350-401 Reliable Exam Sims - They are quite convenient.
With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. However, the competition of becoming the social elite is fierce for all people. The 350-401 Reliable Exam Sims latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 350-401 Reliable Exam Sims exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 350-401 Reliable Exam Sims learning guide.
We have the confidence and ability to make you finally have rich rewards. Our 350-401 Reliable Exam Sims learning materials provide you with a platform of knowledge to help you achieve your wishes.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
ISACA CRISC - It means you can try our demo and you do not need to spend any money. In this case, we need a professional Cisco 300-430 certification, which will help us stand out of the crowd and knock out the door of great company. IBM C1000-168 - There are a lot of experts and professors in the field in our company. Salesforce Platform-App-Builder - You can see the high pass rate as 98% to 100%, which is unmarched in the market. Huawei H21-421_V1.0 - More importantly, the demo from our company is free for all people.
Updated: May 28, 2022