Would you like to register Cisco 350-401 Reliable Dumps Book certification test? Would you like to obtain 350-401 Reliable Dumps Book certificate? Without having enough time to prepare for the exam, what should you do to pass your exam? In fact, there are techniques that can help. Even if you have a very difficult time preparing for the exam, you also can pass your exam successfully. How do you do that? The method is very simple, that is to use Omgzlook Cisco 350-401 Reliable Dumps Book dumps to prepare for your exam. In fact, we always will unconsciously score of high and low to measure a person's level of strength, believe that we have experienced as a child by elders inquire achievement feeling, now, we still need to face the fact. Our society needs all kinds of comprehensive talents, the 350-401 Reliable Dumps Book latest dumps can give you what you want, but not just some boring book knowledge, but flexible use of combination with the social practice. Your personal experience will defeat all advertisements that we post before.
Now, quickly download 350-401 Reliable Dumps Book free demo for try.
Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Dumps Book learning questions, and it is their job to officiate the routines of offering help for you. If the Dump 350-401 File exam is coming and the time is tense, it is better to choose our Dump 350-401 File test engine dumps. Dump 350-401 File test engine can simulate the actual test during the preparation and record the wrong questions for our reviewing.
And so many of our loyal customers have achieved their dreams with the help of our 350-401 Reliable Dumps Book exam questions. Your aspiring wishes such as promotion chance, or higher salaries or acceptance from classmates or managers and so on. And if you want to get all benefits like that, our 350-401 Reliable Dumps Book training quiz is your rudimentary steps to begin.
Cisco 350-401 Reliable Dumps Book - And the number of our free coupon is limited.
Our 350-401 Reliable Dumps Book exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. Our excellent professionals are furnishing exam candidates with highly effective 350-401 Reliable Dumps Book study materials, you can even get the desirable outcomes within one week. By concluding quintessential points into 350-401 Reliable Dumps Book actual exam, you can pass the exam with the least time while huge progress.
Convenience of the online version of our 350-401 Reliable Dumps Book study materials is mainly reflected in the following aspects: on the one hand, the online version is not limited to any equipment. You are going to find the online version of our 350-401 Reliable Dumps Book exam prep applies to all electronic equipment, including telephone, computer and so on.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
It is all about the superior concrete and precision of our Symantec 250-587 learning quiz that help. We are dedicated to your accomplishment, hence pledges you victory in HP HPE0-V28 exam in a single attempt. We also hope you can believe that Salesforce Revenue-Cloud-Consultant-Accredited-Professional exam guide is definitely the most powerful weapon to help you pass the exam. If you want to pass the Cisco Cisco 300-615 exam in the first attempt, then don’t forget to go through the Cisco 300-615 practice testprovided by the Omgzlook. Microsoft MS-102 - They have a keen sense of smell in the direction of the exam.
Updated: May 28, 2022