Actually, we never stop researching the new functions of the study materials. Normally, we will release our new version of the 350-401 Reliable Cram Materials exam simulation on our website once it passed the tests. Many details will be perfected in the new version of our 350-401 Reliable Cram Materials study materials not not on the content, but also on the displays. We try to offer the best 350-401 Reliable Cram Materials exam braindumps to our customers. First of all, in order to give users a better experience, we have been updating the system of 350-401 Reliable Cram Materials simulating exam to meet the needs of more users. Our Omgzlook IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same.
CCNP Enterprise 350-401 Omgzlook is a professional website.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Cram Materials real questions are high efficient which can help you pass the exam during a week. If you have any questions about the exam, Omgzlook the Cisco 350-401 Latest Practice Questions Files will help you to solve them. Within a year, we provide free updates.
As a responsible company over ten years, we are trustworthy. In the competitive economy, this company cannot remain in the business for long. But we keep being the leading position in contrast.
Cisco 350-401 Reliable Cram Materials - If you feel exam is a headache, don't worry.
If you are still study hard to prepare the Cisco 350-401 Reliable Cram Materials exam, you're wrong. Of course, with studying hard, you can pass the exam. But may not be able to achieve the desired effect. Now this is the age of the Internet, there are a lot of shortcut to success. Omgzlook's Cisco 350-401 Reliable Cram Materials exam training materials is a good training materials. It is targeted, and guarantee that you can pass the exam. This training matrial is not only have reasonable price, and will save you a lot of time. You can use the rest of your time to do more things. So that you can achieve a multiplier effect.
Our 350-401 Reliable Cram Materials guide question dumps are suitable for all age groups. Even if you have no basic knowledge about the relevant knowledge, you still can pass the 350-401 Reliable Cram Materials exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
If you are concerned about the test, however, you can choose Omgzlook's Cisco PRINCE2 PRINCE2-Foundation exam training materials. Please be assured that with the help of Juniper JN0-105 learning materials, you will be able to successfully pass the exam. And then, to take Cisco EC-COUNCIL 312-38 exam can help you to express your desire. We had to spare time to do other things to prepare for SAP C_C4H620_34 exam, which delayed a lot of important things. If you successfully get Cisco BCS CTFL4 certificate, you can finish your work better.
Updated: May 28, 2022