By our three versions of 350-401 Reliable Braindumps Ebook study engine: the PDF, Software and APP online, we have many repeat orders in a long run. The PDF version helps you read content easier at your process of studying with clear arrangement, and the PC Test Engine version of 350-401 Reliable Braindumps Ebook practice questions allows you to take stimulation exam to check your process of exam preparing, which support windows system only. Moreover, there is the APP version of 350-401 Reliable Braindumps Ebook study engine, you can learn anywhere at any time. The Cisco 350-401 Reliable Braindumps Ebook practice exam has the questions very similar to the actual exam, and all the 350-401 Reliable Braindumps Ebook answers are checked and confirmed by our professional expert. Our 350-401 Reliable Braindumps Ebook study pdf is especially designed to give you a unique experience and make sure your success pass. With 350-401 Reliable Braindumps Ebook learning materials, you can study at ease, and we will help you solve all the problems that you may encounter in the learning process.
CCNP Enterprise 350-401 You won't regret for your wise choice.
CCNP Enterprise 350-401 Reliable Braindumps Ebook - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) The use of test preparation exam questions helps them to practice thoroughly. In order to make sure you have answered all questions, we have answer list to help you check. Then you can choose the end button to finish your exercises of the Reliable Dumps For 350-401 study guide.
We promise during the process of installment and payment of our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prep torrent, the security of your computer or cellphone can be guaranteed, which means that you will be not afraid of virus intrusion and personal information leakage. Besides we have the right to protect your email address and not release your details to the 3rd parties. Moreover if you are not willing to continue our 350-401 Reliable Braindumps Ebook test braindumps service, we would delete all your information instantly without doubt.
Cisco 350-401 Reliable Braindumps Ebook - You cannot always stay in one place.
With many advantages such as immediate download, simulation before the real exam as well as high degree of privacy, our 350-401 Reliable Braindumps Ebook actual exam survives all the ordeals throughout its development and remains one of the best choices for those in preparation for 350-401 Reliable Braindumps Ebook exam. Many people have gained good grades after using our 350-401 Reliable Braindumps Ebook real dumps, so you will also enjoy the good results. Don’t hesitate any more. Time and tide wait for no man. Come and buy our 350-401 Reliable Braindumps Ebook exam questions!
The 350-401 Reliable Braindumps Ebook certification exam training tools contains the latest studied materials of the exam supplied by IT experts. In the past few years, Cisco certification 350-401 Reliable Braindumps Ebook exam has become an influenced computer skills certification exam.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
And after using our SAP C-THR81-2405 learning prep, they all have marked change in personal capacity to deal with the SAP C-THR81-2405 exam intellectually. The industrious Omgzlook's IT experts through their own expertise and experience continuously produce the latest Cisco IBM C1000-162 training materials to facilitate IT professionals to pass the Cisco certification IBM C1000-162 exam. SAP C_S4TM_2023 - So during your formative process of preparation, we are willing be your side all the time. SAP C-S4CPR-2402 - If you fail to pass the exam, Omgzlook will full refund to you. We are determined to give hand to the candidates who want to pass their Huawei H13-611_V5.0 exam smoothly and with ease by their first try.
Updated: May 28, 2022