Just add it to your cart. Our website gives detailed guidance to our candidates for the preparations of 350-401 Reliable Braindumps Book actual test and lead them toward the direction of success. Each question in 350-401 Reliable Braindumps Book pass guide is certified by our senior IT experts to improve candidates' ability and skills. As a key to the success of your life, the benefits that our 350-401 Reliable Braindumps Book study braindumps can bring you are not measured by money. 350-401 Reliable Braindumps Book exam questions can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, our 350-401 Reliable Braindumps Book study materials will lead you to success. Omgzlook gives you unlimited online access to 350-401 Reliable Braindumps Book certification practice tools.
CCNP Enterprise 350-401 Trust us and you will get success for sure!
As long as you follow with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Braindumps Book study guide, you are doomed to achieve your success. One more to mention, we can help you make full use of your sporadic time to absorb knowledge and information. We would like to provide our customers with different kinds of Reliable 350-401 Test Dumps.Zip practice guide to learn, and help them accumulate knowledge and enhance their ability.
350-401 Reliable Braindumps Book exam practice software allows you to practice on real 350-401 Reliable Braindumps Book questions. The 350-401 Reliable Braindumps Book Practice Exam consists of multiple practice modes, with practice history records and self-assessment reports. You can customize the practice environment to suit your learning objectives.
Cisco 350-401 Reliable Braindumps Book - You can totally rely on us.
If you buy online classes, you will need to sit in front of your computer on time at the required time; if you participate in offline counseling, you may need to take an hour or two of a bus to attend class. But if you buy 350-401 Reliable Braindumps Book test guide, things will become completely different. Unlike other learning materials on the market, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) torrent prep has an APP version. You can download our app on your mobile phone. And then, you can learn anytime, anywhere. Whatever where you are, whatever what time it is, just an electronic device, you can do exercises. With Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) torrent prep, you no longer have to put down the important tasks at hand in order to get to class; with 350-401 Reliable Braindumps Book exam questions, you don’t have to give up an appointment for study.
Omgzlook's study guides are your best ally to get a definite success in 350-401 Reliable Braindumps Book exam. The guides contain excellent information, exam-oriented questions and answers format on all topics of the certification syllabus.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
The mails provide the links and if only the clients click on the links they can log in our software immediately to learn our SAP C-THR81-2405 guide materials. If for any reason, a candidate fails in Microsoft DP-420 exam then he will be refunded his money after the refund process. Microsoft MB-330 - Our company keeps pace with contemporary talent development and makes every learners fit in the needs of the society. One way to makes yourself competitive is to pass the Huawei H20-421_V1.0 certification exams. We have made all efforts to update our products in order to help you deal with any change, making you confidently take part in the CompTIA 220-1102 exam.
Updated: May 28, 2022